Greater London · England
Bath Repair for Feltham homes
Bath repair across Feltham and nearby, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- A kit repair that didn’t last
- Snagging damage from a refit
About Feltham
Feltham is about 6 miles south-west of Ealing, in Greater London. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our technicians cover all 764 towns and villages in Greater London. You can also see our page for London, about 14 miles away.
Here we cover the TW14 and TW13 postcode area. From High Street, Railway Terrace and Sandycombe Road or a nearby road, we can come to you. You will find Feltham on the A244 and B377, so it’s easy for us to reach. If you’re just outside Feltham, we cover Bedfont (1 mile west), Hounslow (1 mile south-west), Hatton (1 mile north), Ashford Common (2 miles south-west) and Cranford (2 miles north). Within a short drive, we also cover London (14 miles east), City of Westminster (12 miles east), Marylebone (12 miles north-east), Kensington (10 miles east), St Pancras (14 miles north-east) and Shoreditch (15 miles east).
Landmarks near Feltham
Our clients here include homes close to Moon On The Square pub, Christ Church and Rivers Academy West London, among other places. Nearby too are St Lawrence Catholic Primary School (within half a mile south-east) and Hounslow Heath (1.2 miles north-east). There is a railway station in Feltham itself: Feltham station. Further afield, we also cover the area around Hounslow Hospital (2.3 miles north-east) and Kempton Steam Museum (1.6 miles south). Not far away are Richmond Hill and Pevensey Road Nature Reserve.
About our bath repair in Feltham
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. If you’re dealing with an old repair that has yellowed or come loose and a cracked acrylic bath, we can normally put it right, whatever the material.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Feltham (TW14, TW13)
- County
- Greater London
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Feltham: your questions answered
Can you fix rust around the plughole?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
How do I book?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
For landlords and businesses
For anyone letting property in or around Feltham, we’ll quote for several properties at once. Send pictures for each one and we’ll price them together.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Signs you need bath repair in Feltham
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.
Look out for these signs:
- Scuffs and scratches in the surface
- An old repair that has yellowed or come loose
- A hole punched through by something heavy
- A cracked acrylic bath
Comparing quotes
- Whether a trained technician does the job
- Whether cleaning and preparation are in the price
- Aftercare advice
- Whether the colour is mixed to match
More services for Feltham
What affects the price in Feltham
Prices start from £95. There is no charge for travel to Feltham. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- The size and number of damaged areas
- What the surface is made of
The price reflects the work involved, not your postcode. The full price is agreed before booking.
Getting a price from photos
Before you send photos, these tips help us give you a firm price:
- Any earlier repairs or coatings
- Something in shot to show the size
- A wider photo showing the whole bath
- The postcode, so we can plan the visit
Upload a photo of the damage and one of the whole item, and tell us you’re in Feltham, and we’ll come back with a fixed quote.
Should you replace it?
Replacing a fitted bath usually means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- Same prices wherever you are
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
- Generally one visit, start to finish
See our prices page or bath cost comparison.
How to look after the repair
Most damage we see is avoidable. These habits help:
- If an acrylic bath flexes, have its feet adjusted
- A dripping tap stains enamel, so fix it early
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
How it works
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take two to three hours for most chips, and we leave the room as we found it.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Point us to the nearest place to park
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
How to get a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. There’s no charge for the quote and no obligation.
Advice
What we cannot put right
It helps to know what we cannot do too:
- Metal that has corroded all the way through
- Flexing caused by a failed cradle or loose feet
- Water coming from the waste or taps rather than the bath
Send us pictures and we’ll tell you honestly.
What we work on
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
