Lincolnshire · England
Bath chip & crack repair in Firsby, Lincolnshire
Bath repair for Firsby, without a refit. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
The process
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take a few hours, and you are welcome to carry on with your day while we work.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the day after, the bath is ready to use.
Before we arrive
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Make sure the area is dry
Get a quote
Most clients in Firsby get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
About our bath repair in Firsby
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the next day. We regularly repair acrylic, pressed steel enamel and whirlpool & spa baths, and the jobs we see most are scuffs and scratches in the surface and impact holes in acrylic.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Firsby (PE23)
- Region
- Lincolnshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
Before you book, it’s worth knowing the limits:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
If in doubt, send photos and we will say what we think before you book.
Materials we work on in Firsby
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
Firsby and the surrounding area
Firsby is about 7 miles west of Skegness, in Lincolnshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 732 towns and villages across Lincolnshire.
Our visits in PE23 work the same way as everywhere else we cover. Other places close to Firsby include Little Steeping (1 mile west), Great Steeping (2 miles north-west), Thorpe Culvert (2 miles south-east), Halton Fenside (2 miles west) and Wainfleet Bank (2 miles south-east). We also work in nearby towns such as Boston (14 miles south-west), Skegness (7 miles east), Horncastle (13 miles west), Mablethorpe (14 miles north), Witham (14 miles south-west) and Sutton on Sea (12 miles north).
Around Firsby
Around Firsby, we work in homes near Church of St Andrew and the streets around them. The nearest railway station is Thorpe Culvert station, roughly 1.6 miles south-east of the centre. Nearby you will also find Magdalen College Museum (3.6 miles south-east).
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
What affects the price in Firsby
Repairs from £95. Every quote is fixed and free. What we take into account:
- Unusual colours or finishes
- Doing more than one item at once
- Any earlier repairs that need removing first
- How easy the damage is to reach
Our prices are the same across the UK, so there is no premium for Firsby. The job itself decides the price: how much damage, what it’s made of and how many items.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- The material, if you know it
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
For a price in Firsby, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Firsby: your questions answered
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Do you cover the entire of Lincolnshire?
The whole UK, including all of Lincolnshire. Send your postcode with your photos and we will confirm dates.
Do you work in Firsby?
Yes. We cover the whole UK and travel to Firsby and the rest of Lincolnshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can you repair a crack in an acrylic bath?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Will I be able to see the repair?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
Should you replace it?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why Firsby clients choose us
- No extra charge for your area
- Most jobs done in one visit
- Nothing taken out or refitted
- Colour-matched on site
See our full price list and guide to resurfacing and replacement costs.
Places near Firsby
More services for Firsby
For landlords and businesses
For anyone letting property in or around Firsby, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Signs you need bath repair in Firsby
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Common reasons people in Firsby contact us are:
- Deep scratches in acrylic
- Holes from dropped items
- Chips caused by builders
- An old repair that has yellowed or come loose
Before booking anyone
- What protection goes down before work starts
- How soon you can use it again
- What prep work is covered
- What the guarantee covers, and for how long
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
