County Durham · England
Bath chip & crack repair in Frosterley, County Durham
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Frosterley and across County Durham. Send pictures for a free, fixed quote.
- Repairs from £95
- Deep scratches in acrylic
- Holes from dropped items
FAQs for Frosterley
What information do you need?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
How invisible is a bath repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
How do I get a price for bath repair in Frosterley?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Bath repair at your home in Frosterley
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Typical jobs include damage done while the bathroom was being fitted and damage beneath the taps, across roll-top & freestanding, whirlpool & spa baths and pressed steel enamel.
A one-year guarantee comes as standard.
- Location
- Frosterley (DL13)
- Region
- County Durham
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath repair in Frosterley?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
It’s worth getting a quote if you see:
- Chips caused by builders
- A cracked acrylic bath
- Scuffs and scratches in the surface
- Holes from dropped items
What your quote should include
- How to care for the finish
- If travel is included in the price
- How the room is protected while they work
- How the colour is matched
Should you replace it?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Prices start from £95. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking.
Why book with us
- Every repair guaranteed for a year
- We leave the room as we found it
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
Read our prices page and bath cost comparison.
How to look after the repair
It’s all simple stuff:
- Protect the bath with a towel when doing jobs nearby
- Check that an acrylic bath does not move when you stand in it
- Avoid scourers, wire wool and gritty cream cleaners
- Get a dripping tap fixed promptly
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
What a repair can’t fix
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- Water coming from the waste or taps rather than the bath
- Wear across the whole surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we will say what we think.
What we work on
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
How the visit works
You do not need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take a morning or an afternoon, and you can get on with other things while we are there.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the following day.
How to prepare
- Have a window or extractor fan available
- Avoid using the area for a few hours before we arrive
- Mention any parking restrictions or tricky access
Ask for a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
Our work in Frosterley
Frosterley is about 10 miles south-west of Consett, in County Durham. Across the DL13 area, we carry out the work at your property. Frosterley is one of 329 towns and villages in County Durham we cover. You can also see our page for Newcastle upon Tyne, about 22 miles away.
Our visits in DL13 work the same way as everywhere else we cover. Whether you live on Cromer Lea, Western Hill and Front Street or anywhere nearby, a technician can come to you. We also travel to Bridge End (1 mile west), Shittlehope (2 miles north-west), Unthank (2 miles north-west), Stanhope (2 miles north-west) and Crawleyside (3 miles north-west). We also work in nearby towns such as Consett (10 miles north-east), Bishop Auckland (12 miles south-east), Spennymoor (14 miles east), Stanley (14 miles north-east), Shildon (14 miles south-east) and Crook (8 miles east).
Around Frosterley
Our clients here include homes close to Black Bull Inn, Church of St Michael and All Angels and Frosterley Primary School and the streets around them. Further afield, we also cover the area around Wear Valley (1.5 miles south-east). For a walk, there is Collier Law.
Places near Frosterley
Other services in Frosterley
How we price bath repair
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- How many items we do on one visit
- Any earlier repairs that need removing first
- The material and finish
- How much damage there is
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
