Greater London · England
Bath chip & crack repair in Gillette Corner, Greater London
Bath repair in Gillette Corner without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Holes from dropped items
- Chips on the rim or sides
How we handle bath repair in Gillette Corner
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. We work on acrylic, cast iron enamel and whirlpool & spa baths, and the jobs we see most are cracks in an acrylic bath and rusty patches near the plughole.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Area
- Gillette Corner (TW7, TW8)
- Region
- Greater London
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Gillette Corner
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
The most common problems we are called about are:
- A cracked acrylic bath
- Snagging damage from a refit
- Rusty patches near the plughole
- Chips under the taps
What to look for in a quote
- Is the price fixed, and does it include VAT?
- How changes to the job are handled
- Whether they match the colour on site
- The length of the guarantee and what it covers
Nearby places to Gillette Corner
More services for Gillette Corner
Honest limits
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- Cracks in parts of an acrylic bath we cannot get to from below
- Wear across the whole surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
Our work in Gillette Corner
Gillette Corner is about 2 miles north-east of Hounslow, in Greater London. Whether you are in the middle of Gillette Corner or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Gillette Corner is one of 764 towns and villages in Greater London where we work. We work right across the region, from Gillette Corner to London (10 miles away).
We work across the TW7 and TW8 postcode area and the streets around it. Jobs here include addresses on Wood Lane, Syon Lane and Darcy Road and the roads around them. If you are just outside Gillette Corner, we cover Brentford End (1 mile east), Spring Grove (1 mile west), Isleworth (1 mile south), Osterley (1 mile west) and Brentford (1 mile east). Within a short drive, we also cover London (10 miles east), City of Westminster (8 miles east), Marylebone (8 miles east), Kensington (6 miles east), St Pancras (9 miles east) and Shoreditch (11 miles east).
What’s near Gillette Corner
Around Gillette Corner, we work in homes near Marlborough Primary School, Boston Manor Park and The Green School, among other places. Other local landmarks include St Mary's Church (0.7 miles west) and Coach and Horses pub (0.5 miles south-east). Gillette Corner has its own railway station: Syon Lane station. A little further out are Treaty Centre (1.9 miles south-west) and Musical Museum (1.5 miles east). Open spaces near Gillette Corner include Long Wood and Garden Lake.
- Parks and local facilities nearby include Municipal Borough of Heston and Isleworth (1.4 miles south-west)
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Make sure the room can be ventilated
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
How to get a price
Most customers in Gillette Corner get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Work for landlords and builders
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Colour mixed on the day to match
- Technicians who travel to you, UK-wide
- One price list for the entire UK
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list or bath cost comparison.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Protect the bath with a towel when doing jobs nearby
- Rinse the bath after use, especially in hard water areas
- Fix dripping taps early to stop staining and limescale
- Keep abrasive pads and gritty cleaners away from the bath
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
What bath repair costs
Prices start from £95. We do not charge extra for travel to Gillette Corner. The price comes down to:
- Any earlier repairs that need removing first
- Access to the area
- Unusual colours or finishes
- How many items we do on one visit
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send photos for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- A clear, close picture of the problem area
- Any details about the material
- A coin or ruler next to the damage for scale
- A photo taken from further back
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Gillette Corner questions
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Something went through my bath. Can it be fixed?
Typically, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Do you come to Gillette Corner?
Yes. We cover the whole UK and travel to Gillette Corner and the rest of Greater London. Send us pictures for a fixed quote, or call 0345 017 0787.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before and we will plan for it.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Gillette Corner.
About our accreditations · Every repair comes with a one-year guarantee.
