Lincolnshire · England
Bath chip & crack repair in Hagnaby, Lincolnshire
Bath repair in Hagnaby without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- Rust by the waste and overflow
- Scratches you can feel with a fingernail
How we handle bath repair in Hagnaby
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the next day. Our technicians work on pressed steel enamel, whirlpool & spa baths and cast iron enamel, and common reasons people get in touch are scuffs and scratches in the surface and rusty patches near the plughole.
Every repair is covered by our one-year guarantee, wherever you are in Lincolnshire.
- Location
- Hagnaby (PE23)
- Region
- Lincolnshire
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a morning or an afternoon for most jobs. We leave the room clean and ready to use once it has cured.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the following day.
Preparing for the visit
- Keep a parking space free if you can
- Let us know about parking or access
- Clear the area around the damage
Getting a price
For a price in Hagnaby, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Nearby places to Hagnaby
What else we do in Hagnaby
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Prices start from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Dust sheets down, tidy finish
- Colour mixed on the day to match
- A year’s guarantee on all work
- Free fixed quotes from pictures
Read our pricing and guide to resurfacing and replacement costs.
Our work in Hagnaby
Hagnaby is about 12 miles north of Boston, in Lincolnshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. Hagnaby is one of 732 towns and villages in Lincolnshire where we work. We work right across the region, from Hagnaby to Leeds (79 miles away).
Postcode districts we cover here: PE23. If you’re just outside Hagnaby, we cover East Kirkby (1 mile west), Old Bolingbroke (1 mile north), Keal Cotes (1 mile east), West Keal (2 miles east) and Stickford (2 miles south-east). Larger places within reach include Boston (12 miles south), Louth (15 miles north), Skegness (13 miles east), Horncastle (7 miles north-west), Woodhall Spa (9 miles west) and Witham (11 miles south).
Local landmarks in Hagnaby
Typical jobs here are in homes near Church of St Andrew, among other places. Open spaces near Hagnaby include Thornbury Hill.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Do you need bath repair in Hagnaby?
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Look out for these signs:
- Chips under the taps
- A chipped rim or side
- Holes from dropped items
- Damage done while the bathroom was being fitted
Comparing quotes
- How the colour is matched
- What prep work is covered
- Whether a trained technician does the job
- How your room will be protected
What affects the price in Hagnaby
Prices start from £95. We give every job a fixed price from pictures. These are the things that affect it:
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
- How many areas need work
- Whether it’s a chip, crack, burn or wear
We charge the same wherever you are, with no extra for Hagnaby. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
You can take the pictures on your phone. Just make sure we can see:
- A close-up of the damage, in focus
- The material, if you know it
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Your questions about bath repair in Hagnaby
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How long before I can use the bath?
Normally by the following day, though it depends on what we have done.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Can you repair a crack in an acrylic bath?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you redo an old repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Can rust on a bath be repaired?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Will the repair show?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Stick to mild cleaners and a soft cloth
- Check that an acrylic bath does not move when you stand in it
- Keep abrasive pads and gritty cleaners away from the bath
- Store metal items away from the bath
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
