Bradford · England
Bath chip & crack repair in Harden, Bradford
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Harden. Send pictures for a free, fixed quote.
- Repairs from £95
- Rust spots around the plughole
- Chips along the edge of the bath
When to call us in Harden
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Keep an eye out for these signs:
- Chips under the taps
- Rusty patches near the plughole
- Chips along the edge of the bath
- Deep scratches in acrylic
Comparing quotes
- What happens if they find more damage
- Whether there are any call-out or travel charges
- How the room is protected while they work
- How long it needs to cure
About our bath repair in Harden
A damaged bath does not have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site. Common call-outs are for cracks in an acrylic bath and chips caused by builders, in acrylic, pressed steel enamel and roll-top & freestanding.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Harden (BD16)
- Area hub
- Bradford
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We clean up when we are done and let you know when you can use it again.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Ensure the room can be ventilated
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Advice
Covering Harden
Harden is about 2 miles south-west of Bingley, in Bradford. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Our repair technicians cover 140 places across Bradford. You can also see our page for Leeds, about 13 miles away.
We cover every part of the BD16 postcode area and the streets around it. Whether you live on Sunny Mount, Ferrands Park Way and Ferrands Close or anywhere nearby, a technician can come to you. Harden is on the B6429, so it’s easy for us to reach. We also travel to Ryecroft (1 mile west), Harecroft (1 mile south), Wilsden (1 mile south), Lee Lane (1 mile south-east) and Cullingworth (1 mile south-west). Further out, we also cover Bradford (5 miles south-east), Keighley (3 miles north-west), Shipley (4 miles east), Baildon (4 miles east), Great Horton (5 miles south-east) and Upper Green (5 miles south-east).
Near you in Harden
Around Harden, we work in homes near Harden Congregational Church, Harden Primary School and Parkside School, among other places. Harden’s nearest station is Bingley station, about 1.5 miles north-east. Further afield, we also cover the area around Lynfield Mount Hospital (3.4 miles south-east) and Ingrow Loco Museum (2.1 miles north-west). Open spaces near Harden include Redcar Tarn and Idle Hill.
What affects the price in Harden
Repairs from £95. You will not pay by the hour. The price depends on:
- Where the damage is and how we get to it
- The material and finish
- The type of damage
- Whether we combine several jobs
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed price
Two or three clear photos are generally enough. It helps if you send:
- A picture taken from further back
- Something in shot to show the size
- Where you are, by postcode
- Details of any past repairs
Email us photos of the damage and one of the entire item, and tell us you are in Harden, and we’ll come back with a fixed quote.
Honest limits
To be straight with you, some problems need a different fix:
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
- Wear across the whole surface, which needs re-enamelling
Send us photos and we’ll tell you honestly before booking.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Landlords, agents and businesses in Harden
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Harden, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Harden: your questions answered
Do you cover Harden?
We do. We send a technician to Harden for every job, and the price is the same as everywhere else.
When can I have a bath again?
Generally within a day, depending on the repair.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before and we will plan for it.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
More services for Harden
Should you replace it?
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in a single visit. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why us?
- CHAS and Constructionline accredited
- Free fixed quotes from pictures
- We’ll tell you if it’s not worth repairing
- Rooms protected and left tidy
Take a look at our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
