Hartlepool · England

Bath chip & crack repair in Hartlepool

Problem with your bath in Hartlepool? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • Chips under the taps
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Hartlepool

Repair or replace: which is better?

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.

Why Hartlepool clients choose us

  • Work done at your home or business
  • Colours mixed by hand to suit your surface
  • One visit for most repairs
  • Same prices wherever you are

Take a look at our prices page or resurfacing vs replacement cost guide.

Bath repair in Hartlepool without replacing anything

We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s a kit repair that didn’t last and damage beneath the taps, we can help, on whirlpool & spa baths, roll-top & freestanding and acrylic alike.

Whatever the size of the job, you get the same one-year guarantee in Hartlepool and the surrounding area.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Hartlepool (TS25, TS24, TS26, TS27)
County
Hartlepool
Cover
12 months on all our work
Price
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026

What your bath is made of matters

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

About Hartlepool

Hartlepool is in England. Jobs in Hartlepool are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We work in all 10 towns and villages across Hartlepool. Our nearest city page is Newcastle upon Tyne, about 26 miles away.

We work across the TS25, TS24, TS26 and TS27 postcode area. Streets in the area include Hartoft Square, Raby Square and Empire Square, all of which we cover. Being close to the A178 and A179, Hartlepool is simple for us to get to. Nearby, we also work in High Throston (1 mile west), Stranton (1 mile south-east), West Park (1 mile south-west), Rift House (1 mile south) and Owton Manor (2 miles south).

Landmarks near Hartlepool

Around Hartlepool, we work in homes near Royal Hotel Royal Public House, Dyke House Sports and Technology College and Sacred Heart RC Primary School and the streets around them. For rail, the closest station is Hartlepool station, roughly 0.8 miles east of the centre. Further afield, we also cover the area around Gray Art Gallery & Museum (0.6 miles east) and Middleton Grange Shopping Centre (0.6 miles south-east). Not far away are Seaton Snook.

  • Other local spots include Throston Rural (1 mile north-west)
Map of Hartlepool © OpenStreetMap contributors

Aftercare tips

Good habits make a big difference to how long a repair lasts:

  • Make sure an acrylic bath is firm underfoot
  • Fix dripping taps early to stop staining and limescale
  • Don’t leave a fresh chip for long
  • Protect the bath with a towel when doing jobs nearby

Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.

Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.

What happens on the day

You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take two to three hours for most chips, and you can get on with other things while we are there.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

Getting ready for the visit

  • Make sure the area is dry
  • Move bottles, mats and clutter away from the area
  • Let us know which floor the room is on

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a fixed price

Related advice

How we price bath repair

Repairs from £95. There are no hourly rates or hidden extras. The price is based on:

  • Previous DIY repairs that have to come out
  • How many areas need work
  • Where the damage is and how we get to it
  • Doing more than one item at once

We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

Send photos for a quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • A clear, close picture of the problem area
  • Good light, ideally daylight, without flash glare
  • Any earlier repairs or coatings
  • What it’s made of, if you know

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.

Do you need bath repair in Hartlepool?

Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.

You may need us if you’ve spotted any of these:

  • A failed DIY repair that’s discoloured or lifting
  • A cracked acrylic bath
  • Rusty patches near the plughole
  • Chips caused by builders

Before you book anyone

  • Aftercare advice
  • Whether the colour is mixed to match
  • Whether the price covers travel
  • How long it needs to cure

How to compare quotes

Should I try a DIY kit first?

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

FAQs for Hartlepool

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Are there extra charges for Hartlepool?

We don’t add a call-out fee. The fixed price covers the visit and the work.

How long before I can use the bath?

Typically the next day. We confirm the time before we leave.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you fix rust around the plughole?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

Do you repair coloured baths?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

What happens after I send pictures?

You will get a fixed quote back, plus dates. You’re under no obligation.

What if the damage is worse than the pictures show?

We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

When a repair is not the answer

Some jobs are not right for a repair, including:

  • Cracks in acrylic we can’t reach from underneath
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Leaks from the waste or overflow fittings (a plumber’s job)

Not sure? Send photos and we will give you a straight answer before you book.

What we work on

  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.