Kirklees · England
Bath Repair for Hartshead homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Hartshead and across Kirklees. Send photos for a free, fixed quote.
- Repairs from £95
- Rust by the waste and overflow
- Damage beneath the taps
About our bath repair in Hartshead
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We’re frequently asked to fix chips on the rim or sides and a cracked acrylic bath, on pressed steel enamel, cast iron enamel and acrylic.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.
- Location
- Hartshead (WF15)
- Area hub
- Kirklees
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Hartshead
Hartshead is about 1 mile south-west of Liversedge, in Kirklees. Across the WF15 area, we carry out the work at your property. We cover all 189 towns and villages across Kirklees, from the larger towns to small villages. Our nearest city page is Leeds, about 11 miles away.
Our visits in WF15 work the same way as everywhere else we cover. From Fall Lane, School Lane and Prospect Road or anywhere nearby, we can come to you. Close by, we cover Moor Top (1 mile south-east), Bracken Hill (1 mile south), Roberttown (1 mile east), Battyeford (1 mile south-east) and Colne Bridge (1 mile south). Larger places within reach include Huddersfield (5 miles south-west), Dewsbury (4 miles east), Batley (4 miles east), Meltham (9 miles south-west), Staincliffe (3 miles east) and West Town (3 miles east).
Landmarks near Hartshead
In Hartshead, that means homes near The Gray Ox pub, Spen Valley High School and Church of St Peter and the streets around them. For rail, the closest station is Brighouse station, about 2.2 miles west of the centre. Other landmarks nearby include Dewsbury Bus Museum (2.8 miles south-east) and Dewsbury and District Hospital (3.1 miles east).
What a repair can’t fix
We won’t take on work that will not last, so here’s what a repair cannot put right:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we’ll tell you honestly.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before booking. We take into account:
- Unusual colours or finishes
- The material
- Whether we combine several jobs
- How much damage there is
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send photos for a quote
You can take the photos on your phone. Ensure they show:
- The material, if you know it
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed quote back. Quotes are free and no obligation.
Should you replace it?
Many people think a damaged bath means a new one. Typically it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Hartshead. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Straight answers about what a repair can do
- We leave the room as we found it
- Every repair guaranteed for a year
- No need to remove anything
See our prices page and bath cost comparison.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Landlord and trade work in Hartshead
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
If you manage property in Hartshead, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Cover the bath during DIY or decorating
- Rinse it down after each bath
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Nearby places to Hartshead
More services for Hartshead
Your questions about bath repair in Hartshead
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do you work in Hartshead?
Yes, we do. We send a technician to Hartshead for every job, with no extra charge for travel.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you redo an old repair?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Will I be able to see the repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
The process
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a few hours. We leave the room clean and you will know when it can be used.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
Ask for a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We will say straight away whether it can be repaired.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
