Doncaster · England
Bath chip & crack repair in Haywood, Doncaster
Damaged bath in Haywood? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Scuffs and scratches in the surface
- Holes from dropped items
Bath repair at your home in Haywood
A typical bath repair is a few hours’ work, and you can generally bathe again the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. We work on pressed steel enamel, acrylic and cast iron enamel, and the jobs we see most are impact holes in acrylic and a chipped rim or side.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Location
- Haywood (DN6)
- County
- Doncaster
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath repair in Haywood
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
When can I have a bath again?
Normally by the following day, though it depends on what we’ve done.
What else we do in Haywood
Repairing versus replacing in Haywood
Swapping a damaged bath for a new one typically means a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Prices start from £95. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with no extras added later.
Why us?
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- CHAS and Constructionline accredited
- A fixed quote before booking
See our full price list and bath cost comparison.
Prices and what affects them
Repairs from £95. Prices are worked out job by job. What matters most is:
- Doing more than one item at once
- Unusual colours or finishes
- The material
- The type of damage
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Quotes from your photos
Photographing the damage takes a minute. Try to send:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- The material, if you know it
- A clear, close picture of the problem area
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Protect the bath with a towel when doing jobs nearby
- Do not leave a fresh chip for long
- Rinse it down after each bath
- Do not scrub with anything abrasive
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow a morning or an afternoon. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Clear toiletries, mats and anything else from around the area
- Tell us if there are stairs or a lift
Ask for a price
For a price in Haywood, pictures are the quickest way: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
When to call us in Haywood
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
People generally call us when they notice one of these:
- An old repair that has yellowed or come loose
- A chip where the taps sit
- Hairline or through cracks in acrylic
- Holes from dropped items
Questions to ask before booking
- Whether a trained technician does the job
- How long it needs to cure
- How your room will be protected
- A fixed quote, and whether VAT is included
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Our work in Haywood
Haywood is about 4 miles north-east of Adwick le Street, in Doncaster. Customers in Haywood get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Haywood is one of 89 places in Doncaster we cover. Our nearest city page is Leeds, about 23 miles away.
We cover every part of the DN6 postcode area. We also cover the places around Haywood: Moss (1 mile north-east), Askern (2 miles north-west), Sutton (2 miles west), Fenwick (2 miles north) and Campsall (3 miles west). Within a short drive, we also cover Doncaster (6 miles south), Adwick le Street (4 miles south-west), Thorne (6 miles east), Conisbrough (10 miles south-west), Bentley (4 miles south) and Armthorpe (6 miles south-east).
Near you in Haywood
Locally, our jobs take us to homes close to Church of All Saints, among other places. The nearest railway station is Kirk Sandall station, about 3.5 miles south-east. Well-known places in the area include Doncaster Royal Infirmary (5.3 miles south) and Hangthwaite (4.2 miles south-west). For a walk, there’s Thorpe Marsh Nature Reserve and Highfields Lake.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
What we can’t put right
It helps to know what we can’t do too:
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we cannot reach from underneath
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
