Kirklees · England

Bath Repair in Heckmondwike

Bath repair for Heckmondwike, without a refit. Send us photos for a fixed quote, then we come to you.

  • Repairs from £95
  • Chips caused by builders
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Heckmondwike

For landlords and businesses

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Bath repair at your home in Heckmondwike

Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for hairline or through cracks in acrylic and rusty patches near the plughole, across cast iron enamel, whirlpool & spa baths and acrylic.

You get a one-year guarantee, the same in Heckmondwike as everywhere else we work.

Where
Heckmondwike (WF16, WF17, WF13, WF15)
County
Kirklees
Guarantee
One year on every repair
Price
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

Repairs by material

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

How the visit works

We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes two to three hours for most chips for most jobs. We leave the room clean.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the next day.

Getting ready for the visit

  • Tell us if there are stairs or a lift
  • Make sure the room can be ventilated
  • Let the surface dry out before the visit

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Get a free quote

Read more

Heckmondwike and nearby

Heckmondwike is about 1 mile south-west of Batley, in Kirklees. We travel to customers in Heckmondwike and the surrounding area, so nothing has to leave your home. Heckmondwike is one of 189 places in Kirklees we cover. We work right across the region, from Heckmondwike to Leeds (about 8 miles away).

We work across the WF16, WF17, WF13 and WF15 postcode area and the streets around it. You’ll find streets such as Milton Square, High Street and Market Street, all of which we cover. Heckmondwike sits on or near the A62 and A638, so getting to you is simple. Close by, we cover Millbridge (1 mile west), Healey (1 mile east), Norristhorpe (1 mile south-west), Liversedge (1 mile west) and Staincliffe (1 mile east). Within a short drive, we also cover Huddersfield (7 miles south-west), Meltham (11 miles south-west), Lockwood (7 miles south-west), Hillhouse (6 miles south-west), Longwood (8 miles south-west) and Longroyd Bridge (7 miles south-west). As one of the bigger places in Kirklees, Heckmondwike sees plenty of our work.

Landmarks near Heckmondwike

Locally, our jobs take us to homes close to Heckmondwike Grammar School, Red Lion pub and Holy Spirit Catholic Primary School. Also close by are Church of St James (under half a mile south) and Wilton Park (1.5 miles north-east). The closest station to Heckmondwike is Batley station, about 1.9 miles east. Further afield, we also cover the area around Dewsbury Museum & Gallery (1.8 miles south-east) and Dewsbury and District Hospital (1 mile south-east). For a walk, there’s Jaw Hill.

Map of Heckmondwike © OpenStreetMap contributors

What bath repair costs

Prices start from £95. You’ll know the full cost before booking. We look at:

  • The type of damage
  • What the surface is made of
  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off

Compared with replacing, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Getting a price from photos

When you take your photos, a few simple things make all the difference:

  • The material, if you know it
  • The postcode, so we can plan the visit
  • A wider photo showing the entire bath
  • A coin beside the damage so we can judge size

Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.

Why repair rather than replace?

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

Why book with us

  • A year’s guarantee on all work
  • One price list for the whole UK
  • Repair technicians who travel to you, UK-wide
  • We leave the room as we found it

See our pricing or resurfacing vs replacement cost guide.

Aftercare tips

Aftercare is simple, and it makes a real difference:

  • Give the bath a quick rinse after use
  • Ensure an acrylic bath is firm underfoot
  • Don’t leave a fresh chip for long
  • Cover the bath during DIY or decorating

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.

When to call us in Heckmondwike

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

Typical reasons for a call-out include:

  • Chips on the rim or sides
  • Rust spots around the plughole
  • A cracked acrylic bath
  • A chip where the taps sit

What to look for in a quote

  • Whether a trained technician does the job
  • What preparation is included
  • Whether the price is fixed and includes VAT
  • When it can be used again

10 questions to ask before you book

Heckmondwike: your questions answered

What happens after I send photos?

We review the pictures and send a fixed quote with dates.

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

How do I book?

Some pictures, your postcode and how to reach you. On the day, we only need access to the room.

Can landlords book you?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

Do I need to be at home?

Someone needs to let us in and show us the job. You don’t need to watch us work.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

Is a holed acrylic bath repairable?

Usually. Send us a picture of the hole and one from under the bath if you can.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

DIY repairs versus a professional job

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.