Worcestershire · England
Bath Repair for Henbrook homes
Local bath repair for Henbrook: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- Chips under the taps
How we handle bath repair in Henbrook
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Typical jobs include a failed DIY repair that’s discoloured or lifting and hairline or through cracks in acrylic, across whirlpool & spa baths, acrylic and pressed steel enamel.
All our work is covered by a one-year guarantee, wherever you are in Worcestershire.
- Area
- Henbrook (WR9)
- County
- Worcestershire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why book with us
- Dust sheets down, tidy finish
- A fixed quote before booking
- Colour mixed on the day to match
- One price list for the whole UK
Read our prices page and guide to resurfacing and replacement costs.
Landlord and trade work in Henbrook
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Common questions in Henbrook
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can a cracked acrylic bath be fixed?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Will the price change on the day?
The price is fixed for what the photos show. If there is more, we will tell you before starting.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Something went through my bath. Can it be fixed?
Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Towns and villages near Henbrook
Other services in Henbrook
What affects the price in Henbrook
Prices start from £95. We charge the same across the UK, including Henbrook. The price reflects:
- Whether we combine several jobs
- Where the damage is and how we get to it
- What kind of damage it is
- How much damage there is
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
Send photos for a quote
Most quotes are done from photos alone. To help us price it:
- Something in shot to show the size
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- Any details about the material
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
What happens on the day
You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we have agreed what we’re doing. It usually takes a few hours, and you’re welcome to carry on with your day while we work.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the following day.
Getting ready for the visit
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
Ask for a price
For a price in Henbrook, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
When to call us in Henbrook
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
You may need us if you’ve spotted:
- Cracks in an acrylic bath
- Damage done while the bathroom was being fitted
- A kit repair that didn’t last
- Rust spots around the plughole
What to look for in a quote
- How soon you can use it again
- Whether the price is fixed and includes VAT
- How your room will be protected
- What preparation is included
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Acrylic cracks with no access behind them
- Water coming from the waste or taps rather than the bath
Send us photos and we’ll tell you honestly before booking.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Covering Henbrook
Henbrook is about 3 miles south-west of Bromsgrove, in Worcestershire. Across the WR9 area, we come to you. Henbrook is one of 376 towns and villages in Worcestershire we cover. Our nearest city page is Birmingham, about 15 miles away.
Our technicians cover all of the WR9 postcode area. If you are just outside Henbrook, we cover Wychbold (1 mile south-west), Hadzor (3 miles south), Hampton Lovett (3 miles west), Droitwich Spa (3 miles south-west) and Dunhampstead (4 miles south). Larger places within reach include Worcester (8 miles south-west), Redditch (7 miles east), Kidderminster (9 miles north-west), Bromsgrove (3 miles north-east), Great Malvern (15 miles south-west) and Stourport-on-Severn (8 miles west).
Landmarks near Henbrook
Locally, our jobs take us to homes close to Church of St Michael and Wychbold First and Nursery School. For rail, the closest station is Bromsgrove station, about 2.8 miles north-east. Other landmarks nearby include Barnsley Hall Hospital (4.2 miles north-east) and Avoncroft Museum of Historic Buildings (1.8 miles north-east). Green spaces nearby include Christopher Cadbury Wetland Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
