Worcestershire · England
Bath Repair in Henwick
Bath repair in and around Henwick: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Rust by the waste and overflow
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours, tidy-up included.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
How to get a price
Most customers in Henwick get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
About our bath repair in Henwick
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We are frequently asked to fix a kit repair that didn’t last and chips caused by builders, on acrylic, roll-top & freestanding and whirlpool & spa baths.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Location
- Henwick (WR2, WR1, WR4)
- Area hub
- Worcestershire
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
Why Henwick clients choose us
- Technicians who travel to you, UK-wide
- Same prices wherever you are
- Fixed prices from your pictures
- Every repair guaranteed for a year
See our prices page or resurfacing vs replacement cost guide.
What a repair can’t fix
Some jobs are not right for a repair, for example:
- Water coming from the waste or taps rather than the bath
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Common questions in Henwick
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
What areas do you cover?
We cover the whole UK, including Henwick and the rest of Worcestershire. Send your postcode with your pictures and we’ll confirm dates.
Can you repair something that is been repaired before?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
What about rust by the waste?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.
Also near Henwick
Other services in Henwick
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Aftercare tips
A little care keeps the finish looking good. Our advice:
- Make sure an acrylic bath is firm underfoot
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
- Give the bath a quick rinse after use
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Landlords, agents and businesses in Henwick
For anyone letting property in or around Henwick, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
What bath repair costs
Prices start from £95. There’s no area surcharge for Henwick. The price reflects:
- The type of damage
- Doing more than one item at once
- What the surface is made of
- The colour and finish to match
We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
Phone photos are fine, there’s no need for anything special. Ensure they show:
- A close-up of the damage, in focus
- A photo taken from further back
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Our work in Henwick
Henwick is about 1 mile west of Worcester, in Worcestershire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. We work in all 376 towns and villages across Worcestershire. We work right across the region, from Henwick to Birmingham (24 miles away).
Jobs in WR2, WR1 and WR4 work the same way as everywhere else we cover. That includes homes on New Road, Comer Road and Graham Road. Being close to the A443, Henwick is easy for our repair technicians to reach. If you’re just outside Henwick, we cover Dines Green (1 mile west), Worcester (1 mile east), Diglis (1 mile south-east), St John's (1 mile south) and Rushwick (1 mile south-west). We also work in nearby towns such as Redditch (15 miles north-east), Kidderminster (13 miles north), Bromsgrove (12 miles north-east), Great Malvern (6 miles south-west), Droitwich Spa (6 miles north-east) and Evesham (14 miles south-east).
What’s near Henwick
In Henwick, that means homes near Gheluvelt Park, Christopher Whitehead Language College and Church of St Clement and the streets around them. You will also find Oldbury Park Primary School (under half a mile north-west), RGS Springfield (0.5 miles north-east) and Crown and Anchor pub (within half a mile north). For rail, the closest station is Worcester Foregate Street station, roughly 0.7 miles east of the centre. Other landmarks nearby include CrownGate Shopping Centre (0.6 miles east) and Mercian Regiment Museum (Worcestershire) (0.6 miles east).
About our accreditations · Every repair comes with a one-year guarantee.
