Newport · Wales

Bath chip & crack repair in High Cross, Newport

Bath repair in High Cross without the cost of replacing. Get a fixed quote from your pictures, then we come to you.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in High Cross?

Work for landlords and builders

Landlords, letting agents and housing providers in High Cross use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

About our bath repair in High Cross

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Whether it’s a hole punched through by something heavy and deep scratches in acrylic, we can help.

A one-year guarantee comes as standard, so you’re covered after the visit.

Location
High Cross (NP10, NP20)
Area hub
Newport
Warranty
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Common questions in High Cross

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Can you fix rust around the plughole?

Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.

What information do you need?

Use the quote form or ring 0345 017 0787, and we’ll take it from there.

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

High Cross and nearby

High Cross is about 2 miles west of Stow Hill, in Newport. Anywhere in NP10, a technician comes to you. High Cross is one of 69 towns and villages in Newport where we work. You can also see our page for Birmingham, about 78 miles away.

All of NP10 and NP20 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Cwm Lane, Cefn Road and Cecil Lane. Nearby, we also work in Bassaleg (1 mile south-west), Rogerstone (1 mile north-west), Ridgeway (1 mile east), Allt-yr-yn (1 mile east) and Garth (1 mile south-west). We also work in nearby towns such as Maindee (3 miles east), Summer Hill (3 miles east), Beechwood (3 miles east), Somerton (3 miles east), Caerleon (4 miles north-east) and St Julians (3 miles east).

Near you in High Cross

We visit homes around Rising Sun pub, Belle Vue Park and Church of Saint Basil and the streets around them. Also close by are Bassaleg School (0.9 miles south), High Cross Primary (less than half a mile south), St John the Baptist Church (0.8 miles west) and Ysgol Tŷ Monmouth (1.3 miles east). High Cross’s nearest station is Pye Corner station, about 0.5 miles south. Nearby you will also find Rogerstone Castle (0.6 miles south-west) and Tredegar House Museum (1.9 miles south). For a walk, there’s Graig Ddifaith and Somerton.

Map of High Cross © OpenStreetMap contributors

Should I try a DIY kit first?

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

How the visit works

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes two to three hours for most chips. At the end we talk you through the curing time and the aftercare.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

Preparing for the visit

  • Tell us if there are stairs or a lift
  • Have somewhere for us to park nearby if possible
  • Tell us about any previous repairs or coatings

Get a quote

If you are in High Cross and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Read more

Looking after it afterwards

It’s all simple stuff, just a few sensible habits:

  • Have new chips seen to early
  • Store metal items away from the bath
  • Give the bath a quick rinse after use
  • A dripping tap stains enamel, so fix it early

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.

Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Do you need bath repair in High Cross?

Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

The most common problems we are called about are:

  • A chipped rim or side
  • Scratches you can feel with a fingernail
  • A chip where the taps sit
  • A cracked acrylic bath

What your quote should include

  • Whether they match the colour on site
  • What protection goes down before work starts
  • How to look after the finish
  • When it can be used again

Our hiring checklist

Prices and what affects them

Prices start from £95. We give every job a fixed quote from pictures. This is what makes a difference:

  • Previous DIY repairs that have to come out
  • What kind of damage it is
  • How hard the colour is to match
  • How much damage there is

Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Quotes from your pictures

Good photos mean an accurate price. Here’s what we find most useful:

  • A photo taken from further back
  • Something in shot to show the size
  • Good light, ideally daylight, without flash glare
  • Where you are, by postcode

To get a price, send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.

Repair or replace in High Cross?

For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for High Cross. The job itself decides the price: the material, the amount of damage and how many items.

Why us?

  • No need to remove anything
  • Dust sheets down, tidy finish
  • Fixed prices from your pictures
  • Work done at your home or business

Read our prices page or bath cost comparison.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.