East Sussex · England

Bath chip & crack repair in Hollingrove, East Sussex

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Hollingrove and across East Sussex. Send photos for a free, fixed quote.

  • Repairs from £95
  • Impact holes in acrylic
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Hollingrove

About our bath repair in Hollingrove

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Typical jobs include hairline or through cracks in acrylic and impact holes in acrylic, on cast iron enamel, pressed steel enamel and roll-top & freestanding.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.

Where
Hollingrove (TN32)
Area hub
East Sussex
Warranty
12 months on all our work
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Landlords, agents and businesses in Hollingrove

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

If you manage property in Hollingrove, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.

What we do, step by step

You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It normally takes two to three hours for most chips, and you are welcome to carry on with your day while we work.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, generally the following day.

Preparing for the visit

  • Let the surface dry out before the visit
  • Open a window if you can
  • Keep pets and children out of the room while we work

Ask for a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

Get a fixed price

Advice

FAQs for Hollingrove

Which areas do you work in?

We cover the entire UK, including Hollingrove and the rest of East Sussex. Just include your postcode and we’ll confirm dates.

Are there extra charges for Hollingrove?

We do not add a call-out fee. Your fixed quote includes everything.

Can you quote from pictures?

Generally, yes. A close-up and a wider photo are enough to give a fixed quote.

Can you repair a chip on a coloured bath?

Yes, we match coloured baths too. We tint the finish to your bath on site.

Is it worth repairing rather than replacing?

Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

What happens if you find more damage?

We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Is there any odour?

It depends on the job, but frequently a little. Open windows and an extractor fan help.

When to call us in Hollingrove

Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.

Customers normally contact us about:

  • A failed DIY repair that is discoloured or lifting
  • A hole punched through by something heavy
  • A chip where the taps sit
  • Scratches you can feel with a fingernail

What your quote should include

  • Who will actually do the work
  • Whether there are any call-out or travel charges
  • Whether they match the colour on site
  • Is the price fixed, and does it include VAT?

Our hiring checklist

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Where we work around Hollingrove

Hollingrove is about 8 miles north of Bexhill-on-Sea, in East Sussex. We travel to clients in Hollingrove and nearby villages, so there is no workshop to go to. Hollingrove is one of 289 places in East Sussex where we work. You can also see our page for London, about 43 miles away.

Our repair technicians cover all of TN32 and the streets around it. Whether you live on Hollingrove Road and Kent Lane or a nearby road, we can come to you. Close by, we cover Brightling (1 mile west), Oxley's Green (1 mile north), Twelve Oaks (1 mile south-west), Netherfield (2 miles south-east) and Penhurst (3 miles south). Further out, we also cover Eastbourne (13 miles south-west), Hastings (9 miles south-east), Bexhill-on-Sea (8 miles south), Hailsham (10 miles south-west), Crowborough (12 miles north-west) and St Leonards (10 miles south-east).

Local landmarks in Hollingrove

Locally, our jobs take us to homes close to The Parish Church of St Thomas A Becket and the streets around them. The nearest railway station is Robertsbridge station, about 3.1 miles north-east. A little further out are Old Castle (2.6 miles south-west) and Ticehurst House Hospital (6 miles north). Not far away are Senlac Hill.

Map of Hollingrove © OpenStreetMap contributors

Different materials, different repairs

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.

When we’d advise against a repair

Honesty matters more than a booking, so here’s what a repair will not do:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Cracks in parts of an acrylic bath we can’t get to from below
  • Leaking fittings, which need a plumber

Send us pictures and we will tell you honestly before booking.

Materials we work on in Hollingrove

  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel

How we price bath repair

Repairs from £95. We don’t charge extra for travel to Hollingrove. The price depends on:

  • Any earlier repairs that need removing first
  • Unusual colours or finishes
  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear

A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.

Getting a price from photos

Most quotes are done from pictures alone. To help us price it:

  • One sharp close-up of the damage
  • Something in shot to show the size
  • One picture of the entire bath
  • Good light, ideally daylight, without flash glare

If you are in Hollingrove and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

How to look after the repair

Aftercare is simple, and it makes a real difference:

  • Put a towel in the bath if you are working above it
  • Stick to mild cleaners and a soft cloth
  • Rinse the bath after use, especially in hard water areas
  • Have new chips seen to early

Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.