Oxfordshire · England
Bath Repair for Hook Norton homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Hook Norton, carried out at your home and guaranteed for a year.
- Repairs from £95
- Holes from dropped items
- Chips on the rim or sides
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why choose Surface Doctor in Hook Norton
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
- Same prices wherever you are
- Honest advice, even when it means no job
Read our pricing or guide to resurfacing and replacement costs.
Bath repair at your home in Hook Norton
Chips, cracks, rust spots and small holes is repaired in place. There’s no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. We’re often asked to fix chips under the taps and holes from dropped items, in acrylic, whirlpool & spa baths and cast iron enamel.
Big or small, you get the same one-year guarantee.
- Area
- Hook Norton (OX15)
- County
- Oxfordshire
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Hook Norton and nearby
Hook Norton is about 7 miles south-west of Banbury, in Oxfordshire. Anywhere in OX15, we come to you. Hook Norton is one of 443 towns and villages in Oxfordshire where we work. Our jobs stretch from Hook Norton to Birmingham (37 miles away).
All of OX15 is within our area. We regularly work on streets such as High Street, Station Road and Chapel Street. We also cover the places around Hook Norton: Swerford (2 miles south-east), Wigginton (2 miles east), South Newington (3 miles east), Little Tew (3 miles south-east) and Great Tew (4 miles south-east). Within a short drive, we also cover Banbury (7 miles north-east), Bicester (15 miles south-east), Witney (15 miles south), Kidlington (15 miles south-east), Bure Park (15 miles south-east) and Chipping Norton (5 miles south-west).
Near you in Hook Norton
Our clients here include homes close to The Bell Inn, Hook Norton Church of England Primary School and Church of St Peter and the streets around them. Nearby you’ll also find Broughton Castle (4.8 miles north-east) and Old Forge Museum (Great Tew) (3.5 miles south-east). The countryside around Hook Norton includes Woodford Bottom and Lamb's Pool.
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Hook Norton. The price reflects:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- What kind of damage it is
- How hard the colour is to match
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
How to get a fixed price
Two or three clear pictures are generally enough. Try to include:
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- A picture taken from further back
- Any details about the material
Upload photos of the damage and a wider shot of the whole item, with your OX15 postcode, and we will come back with a fixed quote.
What happens on the day
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for a few hours, depending on the damage. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Clear the area around the damage
- Keep children and pets away from the room on the day
- Avoid using the area for a few hours before we arrive
Get a quote
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Signs you need bath repair in Hook Norton
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal will start to rust.
If you can see any of these, send us a picture:
- Scratches you can feel with a fingernail
- Damage beneath the taps
- Rusty patches near the plughole
- Hairline or through cracks in acrylic
What your quote should include
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
- How your room will be protected
- Whether the price is fixed and includes VAT
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Give the bath a quick rinse after use
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t leave razors or cans standing in the bath
- Check that an acrylic bath does not move when you stand in it
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Also near Hook Norton
More services for Hook Norton
Hook Norton: your questions answered
Do you come to Hook Norton?
Yes. We cover the whole UK and travel to Hook Norton and the rest of Oxfordshire. Send pictures and we’ll quote, or call 0345 017 0787.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
When can I have a bath again?
Normally by the following day, though it depends on what we have done.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
About our accreditations · Every repair comes with a one-year guarantee.
