Worcestershire · England
Bath Repair in Hurcott
Fixed-price bath repair in Hurcott and the surrounding area, usually in one visit.
- Repairs from £95
- Deep scratches in acrylic
- Impact holes in acrylic
What affects the price in Hurcott
Prices start from £95. We don’t charge extra for travel to Hurcott. The price comes down to:
- How many areas need work
- How many items we do on one visit
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with no extras added later.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- A picture taken from further back
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- A coin beside the damage so we can judge size
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Bath repair in Hurcott without replacing anything
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We regularly repair pressed steel enamel, roll-top & freestanding and cast iron enamel, and common reasons people get in touch are rust spots around the plughole and a chipped rim or side.
All our work is covered by our one-year guarantee.
- Where
- Hurcott (DY10)
- County
- Worcestershire
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
About Hurcott
Hurcott is about 1 mile north-east of Kidderminster, in Worcestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Hurcott is one of 376 places in Worcestershire where we work. We work right across the region, from Hurcott to Birmingham (about 15 miles away).
Our repair technicians cover all of DY10 and the streets around it. We regularly work on streets such as Hurcott Lane and Hurcott Road and the roads around them. Other places close to Hurcott include Comberton (1 mile south), Kidderminster (1 mile south-west), Stone (2 miles south), Spennells (2 miles south) and Stanklyn (2 miles south). Larger places within reach include Worcester (14 miles south), Redditch (14 miles south-east), Bromsgrove (8 miles south-east), Droitwich Spa (10 miles south), Stourport-on-Severn (5 miles south-west) and Bewdley (4 miles west).
Near you in Hurcott
Our clients here include homes close to St Oswald's Church Centre, Holy Trinity School and King Charles I School, among other places. The nearest railway station is Kidderminster station, about 1.2 miles south-west. Well-known places in the area include Caldwall Castle (1.6 miles south-west) and Kidderminster Hospital (1.9 miles south-west). Open spaces near Hurcott include Wilden Marsh and Axborough Hill.
Also in Hurcott
Hurcott questions
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
When can I have a bath again?
Normally within a day, depending on the repair.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Something went through my bath. Can it be fixed?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Hurcott.
What happens once I’ve sent pictures?
You will get a fixed quote back. There is no obligation to book.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can a cracked acrylic bath be fixed?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Don’t leave razors or cans standing in the bath
- Keep abrasive pads and gritty cleaners away from the bath
- Clean with warm water and a mild detergent
- If an acrylic bath flexes, have its feet adjusted
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Signs you need bath repair in Hurcott
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
The most common problems we’re called about are:
- Rust spots around the plughole
- Scuffs and scratches in the surface
- Snagging damage from a refit
- Chips under the taps
Comparing quotes
- Who will actually do the work
- Is the price fixed, and does it include VAT?
- If travel is included in the price
- What aftercare is recommended
Honest limits
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Wear across the whole surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we can’t get to from below
Send us photos and we will tell you honestly before booking.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
Repairing versus replacing in Hurcott
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Hurcott customers choose us
- Repair technicians who travel to you, UK-wide
- Normally one visit, start to finish
- CHAS and Constructionline accredited
- Colour-matched on site
See our pricing or guide to resurfacing and replacement costs.
How it works
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. Allow a few hours, depending on the damage.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
How to prepare
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
