Buckinghamshire · England

Bath Repair in Hyde Heath

Bath repair across Hyde Heath and nearby, usually in one visit.

  • Repairs from £95
  • A cracked acrylic bath
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Hyde Heath

Bath repair in Hyde Heath, done in place

Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour matched so it blends in. Typical jobs include a kit repair that didn’t last and scratches you can feel with a fingernail, on cast iron enamel, pressed steel enamel and acrylic.

A one-year guarantee comes as standard.

Before and after: a chipped, rust-stained bath around the plughole
Where
Hyde Heath (HP6)
Area hub
Buckinghamshire
Warranty
One year on every repair
Quotes
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

What we do, step by step

Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes two to three hours for most chips, and we leave the room as we found it.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Let the surface dry out before the visit
  • Clear the area around the damage

Get a quote

You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.

Get a fixed price

Read more

Hyde Heath questions

What happens next?

We come back with a fixed quote, plus dates. You’re under no obligation.

Can you redo someone else’s repair?

Most of the time. Let us know what was used before.

What do you need from me?

Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.

Can you match an avocado or pink bath?

Yes. We mix the colour on the day to match, including older coloured suites.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is it worth repairing rather than replacing?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Something went through my bath. Can it be fixed?

Often, if there’s access underneath. The hole is backed, filled and refinished to match.

Repair or replace: which is better?

Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like is not cheap. A repair keeps it in place. Repairs from £95, with every job priced individually. Our prices are the same across the UK, so there is no premium for Hyde Heath. What changes the price is the job itself: the material, the amount of damage and how many items.

Why us?

  • Free fixed quotes from pictures
  • Most jobs done in one visit
  • Rooms protected and left tidy
  • We’ll tell you if it’s not worth repairing

See our full price list and guide to resurfacing and replacement costs.

Materials and what they mean for the repair

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

What a repair cannot fix

To be straight with you, some problems need a different fix:

  • A bath worn all over, where resurfacing makes more sense
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Water coming from the waste or taps rather than the bath

Not sure? Send pictures and we will give you a straight answer.

Materials we work on in Hyde Heath

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding

How to care for the repair

Once the work has cured, treat it gently:

  • Get a dripping tap fixed promptly
  • Store metal items away from the bath
  • Don’t leave a fresh chip for long
  • Stick to mild cleaners and a soft cloth

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

Signs you need bath repair in Hyde Heath

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.

Typical reasons for a call-out include:

  • A chip where the taps sit
  • Chips on the rim or sides
  • A cracked acrylic bath
  • Rusty patches near the plughole

Comparing quotes

  • How long it needs to cure
  • Is the price fixed, and does it include VAT?
  • Whether cleaning and preparation are in the price
  • What happens if the damage is worse than the pictures show

Choosing a repair company

Covering Hyde Heath

Hyde Heath is about 2 miles south-west of Chesham, in Buckinghamshire. Across the HP6 area, a technician comes to you. Our repair technicians cover 263 places in Buckinghamshire. You can also see our page for London, about 27 miles away.

Every address in HP6 is within our area, from the main roads to the quietest streets. From Brays Meadow, Meadow Way and Westfield or a nearby road, a technician can come to you. We also cover the places around Hyde Heath: Mop End (2 miles south), Chesham Bois (2 miles east), Waterside (2 miles east), Beamond End (2 miles south-west) and Woodrow (2 miles south). Further out, we also cover Aylesbury (11 miles north-west), High Wycombe (6 miles south-west), Marlow (10 miles south-west), Beaconsfield (6 miles south), Chalfont St Peter (7 miles south-east) and Elmhurst (11 miles north-west).

What’s near Hyde Heath

Locally, our jobs take us to homes close to Hyde Heath Infant School, Chiltern Hills Academy and The Plough pub, among other places. For rail, the closest station is Amersham station, roughly 2.2 miles south-east. Other landmarks nearby include Great Missenden (1.5 miles west) and Chiltern Hospital (1.8 miles west). Not far away are Sands Bank.

Map of Hyde Heath © OpenStreetMap contributors

Prices and what affects them

Repairs from £95. We price every job individually. What matters most is:

  • How easy the damage is to reach
  • Previous DIY repairs that have to come out
  • Unusual colours or finishes
  • How many items we do on one visit

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Send photos for a quote

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • Where you are, by postcode
  • Whether it’s been repaired or coated before
  • A coin beside the damage so we can judge size
  • A clear, close picture of the problem area

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.