Greater London · England

Bath Repair in Ilford

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Ilford, with a one-year guarantee on every repair.

  • Repairs from £95
  • A failed DIY repair that is discoloured or lifting
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Ilford

What we’re called out for in Ilford

Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.

Most people get in touch after spotting something like this:

  • Deep scratches in acrylic
  • A failed DIY repair that’s discoloured or lifting
  • A hole punched through by something heavy
  • A chip where the taps sit

What to look for in a quote

  • Whether a trained technician does the job
  • Whether cleaning and preparation are in the price
  • How to care for the finish
  • Whether they match the colour on site

How to compare quotes

How we handle bath repair in Ilford

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. You can generally use the bath the next day. If you are dealing with rust by the waste and overflow and a chipped rim or side, we can usually put it right.

The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.

Where
Ilford (IG1, IG3, IG2, E12)
Area hub
Greater London
Warranty
A year, on every repair
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

DIY kit or professional repair?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Work for landlords and builders

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

Housing associations and facilities teams use us for planned and reactive repairs in Greater London and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Where we work around Ilford

Ilford is about 4 miles east of Leyton, in Greater London. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover all 764 towns and villages in Greater London. We work right across the region, from Ilford to London (8 miles away).

Jobs in IG1, IG3, IG2 and E12 are booked in the same way as anywhere else. Whether you live on Station Road, Axon Place and Hainault Street or a nearby road, we can come to you. Main roads around Ilford include the A118, which makes travel easy. Close by, we cover Cranbrook (1 mile north-west), Loxford (1 mile south), Seven Kings (1 mile north-east), Manor Park (1 mile south-west) and Little Ilford (1 mile south-west). Within a short drive, we also cover London (8 miles south-west), City of Westminster (10 miles west), Marylebone (10 miles west), Kensington (13 miles west), St Pancras (9 miles west) and Shoreditch (7 miles west).

Landmarks near Ilford

In Ilford, that means homes near Great Spoon of Ilford pub, The Ursuline Academy Ilford and South Park, among other places. You’ll also find Winston Way Academy (less than half a mile east) and St Alban's Church (less than half a mile south). Ilford has its own railway station: Ilford station. Well-known places in the area include East Ham (2.1 miles south-west) and Barking Community Hospital (1.8 miles south-east). Not far away are Hollow Pond and Ripple Nature Reserve.

Map of Ilford © OpenStreetMap contributors

When a repair is not the answer

Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:

  • Rust that has eaten right through a steel bath
  • Cracks in parts of an acrylic bath we can’t get to from below
  • A bath that moves underfoot, until its support is fixed

If in doubt, send pictures and we will say what we think before booking.

Materials we work on in Ilford

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel

How the visit works

Arrival times are agreed in advance, so you are not left guessing. Once we are there, the work takes a few hours for most jobs. We leave the room clean.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the next day.

Before we arrive

  • Tell us if there are stairs or a lift
  • Mention any parking restrictions or tricky access
  • Keep a parking space free if you can

How to get a price

Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you are under no obligation.

Get a free quote

Advice

Repairing versus replacing in Ilford

People frequently assume a cracked or chipped bath has to come out. Typically it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.

Why choose Surface Doctor in Ilford

  • Rooms protected and left tidy
  • We will tell you if it’s not worth repairing
  • Free fixed quotes from pictures
  • Most jobs done in one visit

Take a look at our pricing and guide to resurfacing and replacement costs.

What affects the price in Ilford

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • How easy the damage is to reach
  • The size and number of damaged areas
  • Whether it’s a chip, crack, burn or wear
  • The material and finish

There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Send pictures for a quote

Before you send photos, these tips help us give you a firm price:

  • The postcode, so we can plan the visit
  • Natural light rather than flash
  • Something in shot to show the size
  • Whether it’s been repaired or coated before

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Common questions in Ilford

Can you repair a chip on a coloured bath?

Yes. We mix the colour on the day to match, including older coloured suites.

Are there extra charges for Ilford?

No. Our quotes include travel, and we charge the same wherever you are.

Something went through my bath. Can it be fixed?

Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

I tried a repair kit. Can you fix it?

Yes. We remove the old filler and start again. Tell us about it when you send photos.

How quickly can you book me in?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

What happens once I’ve sent photos?

You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.

Can tenants book a repair?

We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

Do you come to Ilford?

Yes. We cover the whole UK and come to Ilford and the rest of Greater London. Send us pictures for a fixed quote, or call 0345 017 0787.

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.