Northamptonshire · England
Bath Repair for Irthlingborough homes
Our repair technicians come to Irthlingborough for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Damage beneath the taps
- A failed DIY repair that’s discoloured or lifting
About our bath repair in Irthlingborough
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, generally in a single visit. We regularly repair roll-top & freestanding, whirlpool & spa baths and acrylic, and the jobs we see most are a hole punched through by something heavy and chips caused by builders.
Every job is backed for twelve months in Irthlingborough and everywhere else. If something goes wrong with the work, we come back.
- Area
- Irthlingborough (NN9)
- Region
- Northamptonshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
So the finish stays in good condition for years:
- Don’t leave razors or cans standing in the bath
- Keep abrasive pads and gritty cleaners away from the bath
- Fix dripping taps early to stop staining and limescale
- Rinse it down after each bath
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What we do, step by step
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes two to three hours for most chips. Before we leave, we explain how soon it can be used and how to care for it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the following day.
How to prepare
- Make sure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
How to get a price
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Read more
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Acrylic cracks with no access behind them
- A steel bath rusted through
- A whole bath that is dull or worn, where a full re-enamel is the better fix
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Irthlingborough questions
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Will the price change on the day?
Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Common problems we fix in Irthlingborough
A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
Keep an eye out for any of the following:
- A failed DIY repair that is discoloured or lifting
- Holes from dropped items
- Scratches you can feel with a fingernail
- Rust spots around the plughole
What your quote should include
- How your room will be protected
- What preparation is included
- What happens if they find more damage
- Aftercare advice
Our work in Irthlingborough
Irthlingborough is about 3 miles north of Rushden, in Northamptonshire. From the centre of Irthlingborough to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover 364 places across Northamptonshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 55 miles away.
All of NN9 is within our area. That includes homes on High Street, Station Road and Scarborough Street. Irthlingborough sits on or near the A6 and B571, so getting to you is simple. Nearby, we also work in Finedon (2 miles north-west), Burton Latimer (4 miles north-west), Cranford St John (4 miles north), Cranford St Andrew (4 miles north) and Twywell (5 miles north). Within a short drive, we also cover Northampton (13 miles south-west), Corby (12 miles north), Kettering (6 miles north-west), Wellingborough (4 miles west), Rushden (3 miles south) and Desborough (12 miles north-west).
Near you in Irthlingborough
In Irthlingborough, that means homes near Huxlow Science College, Church of St Peter and Irthlingborough Nursery and Infant School. For rail, the closest station is Wellingborough station, roughly 3 miles south-west of the centre. Nearby you will also find Rushden Museum (2.7 miles south) and Rushden Lakes (1.8 miles south). The countryside around Irthlingborough includes Swanspool Lake and Irthlingborough Lakes and Meadows.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Places near Irthlingborough
More services for Irthlingborough
Repair or replace in Irthlingborough?
People frequently assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why us?
- Same prices wherever you are
- Repair technicians who travel to you, UK-wide
- Colour mixed on the day to match
- Normally one visit, start to finish
Take a look at our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
