Essex · England
Bath chip & crack repair in Jack's Hatch, Essex
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Jack's Hatch and across Essex. Send pictures for a free, fixed quote.
- Repairs from £95
- A kit repair that didn’t last
- Damage beneath the taps
Bath repair at your home in Jack's Hatch
Most of our bath repairs take a few hours, and the bath is back in use the next day. You will not need a plumber or tiler, because nothing is disconnected. Common call-outs are for impact holes in acrylic and snagging damage from a refit, in acrylic, pressed steel enamel and roll-top & freestanding.
Whatever the size of the job, you get the same one-year guarantee in Jack's Hatch and across Essex.
- Area
- Jack's Hatch (CM16)
- Region
- Essex
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so repair chips early.
About Jack's Hatch
Jack's Hatch is about 3 miles south-west of Harlow, in Essex. From the centre of Jack's Hatch to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 644 places across Essex, from the larger towns to small villages. We work right across the region, from Jack's Hatch to London (about 18 miles away).
We cover every part of CM16. With the B181 close by, Jack's Hatch is easy for our repair technicians to reach. We also cover the places around Jack's Hatch: Broadley Common (1 mile west), Epping Green (1 mile south), Tylerscross (1 mile north-west), Staple Tye (1 mile north-east) and Great Parndon (1 mile north). Larger places within reach include Harlow (3 miles north-east), Brentwood (13 miles south-east), Loughton (6 miles south), Waltham Abbey (5 miles south-west), Great Dunmow (15 miles north-east) and Epping (3 miles south-east).
Local landmarks in Jack's Hatch
Typical jobs here are in homes near Stewards School, St James with St Luke and Nazeing Triangle. Other local landmarks include Travellers Friend pub (0.7 miles south) and Water Lane Primary Academy (0.6 miles north). For rail, the closest station is Roydon station, roughly 3 miles north-west of the centre. A little further out are Harlow Mill (4.1 miles north-east) and Nazeing Glass Museum (3.3 miles west). Open spaces near Jack's Hatch include Cheshunt Lake and Hunsdon Mead.
Jack's Hatch: your questions answered
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
How do I get a price for bath repair in Jack's Hatch?
Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your CM16 postcode.
How the visit works
The work is clean and fairly quiet. Protection goes down first, then the work takes a few hours, depending on the damage. Before we leave, we explain the curing time and the aftercare.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
How to prepare
- Mention any parking restrictions or tricky access
- Open a window if you can
- Tell us about any previous repairs or coatings
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job the same day in most cases.
Read more
Aftercare tips
Most damage we see is avoidable. These habits help:
- Get any new chip repaired before it rusts
- Avoid scourers, wire wool and gritty cream cleaners
- Ensure an acrylic bath is firm underfoot
- Don’t leave razors or cans standing in the bath
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Nearby places to Jack's Hatch
Other services in Jack's Hatch
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
What a repair cannot fix
It helps to know what we cannot do:
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Jack's Hatch. What changes the price is the job itself: the material, the amount of damage and how many items.
Why Jack's Hatch customers choose us
- Free fixed quotes from pictures
- We come to you, anywhere in the UK
- Colour-matched on site
- Dust sheets down, tidy finish
See our pricing and resurfacing vs replacement cost guide.
When to call us in Jack's Hatch
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
Common reasons people in Jack's Hatch contact us are:
- Impact holes in acrylic
- Chips caused by builders
- Scratches you can feel with a fingernail
- A cracked acrylic bath
Questions to ask before you book
- How to look after the finish
- When it can be used again
- What preparation is included
- How changes to the job are handled
About our accreditations · Every repair comes with a one-year guarantee.
