Bolton · England

Bath Repair for Kearsley homes

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Kearsley, with a one-year guarantee on every repair.

  • Repairs from £95
  • A kit repair that didn’t last
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Kearsley

Bath repair in Kearsley without replacing anything

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. We are frequently asked to fix impact holes in acrylic and rust spots around the plughole, across cast iron enamel, roll-top & freestanding and pressed steel enamel.

A one-year guarantee comes as standard.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Kearsley (BL4, M26)
Region
Bolton
Warranty
A year, on every repair
Price
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

How we price bath repair

Prices start from £95. We price every job individually, from your pictures. The main factors are:

  • Whether it’s a chip, crack, burn or wear
  • Whether we combine several jobs
  • What the surface is made of
  • Whether old repairs or coatings need taking off

Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Send pictures for a quote

Photographing the damage takes a minute, and it saves a visit. Please include:

  • One picture of the whole bath
  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • What it’s made of, if you know

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

What your bath is made of matters

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Kearsley: your questions answered

Will I be able to see the repair?

The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

Which areas do you work in?

All of Bolton, and the rest of the UK. Travel is included in the price.

What happens next?

We come back with a fixed price, generally with dates to choose from. There is no obligation to book.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.

Will the price change on the day?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

Can a cracked acrylic bath be fixed?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.

Our work in Kearsley

Kearsley is about 1 mile east of Farnworth, in Bolton. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Kearsley is one of 61 towns and villages in Bolton where we work. We work right across the region, from Kearsley to Manchester (about 8 miles away).

We work across BL4 and M26 and the streets around it. You’ll find streets such as Station Road, Market Street and Church Road, and we cover them all. You’ll find Kearsley on the A666 and A667, which makes it straightforward to reach. Other places close to Kearsley include Stoneclough (1 mile north-east), Prestolee (1 mile north-east), Ringley (1 mile east), Linnyshaw (1 mile south) and Little Lever (1 mile north). Within a short drive, we also cover Bolton (4 miles north-west), Horwich (8 miles north-west), Halliwell (4 miles north-west), Westhoughton (6 miles west), Daubhill (3 miles north-west) and Great Lever (3 miles north-west). As one of the bigger places in Bolton, Kearsley is somewhere we visit frequently.

Around Kearsley

Typical jobs here are in homes near St Stephen's CofE Primary School, Church of St Stephen and Moses Gate Country Park, among other places. Kearsley has its own railway station: Kearsley station. Other landmarks nearby include Swinton Shopping Centre (2.6 miles south-east) and Royal Bolton Hospital (2.3 miles west). The countryside around Kearsley includes Nob End.

Map of Kearsley © OpenStreetMap contributors

Do you need bath repair in Kearsley?

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.

Common reasons people in Kearsley contact us are:

  • Impact holes in acrylic
  • Damage done while the bathroom was being fitted
  • Cracks in an acrylic bath
  • A chip where the taps sit

What your quote should include

  • Is the price fixed, and does it include VAT?
  • What preparation is included
  • What happens if the damage is worse than the pictures show
  • How long it needs to cure

Choosing a repair company

Landlords, agents and businesses in Kearsley

If you manage property in Kearsley, we will quote for several properties at once. Send photos for each one and we will price them together.

We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.

What we do, step by step

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on the damage, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Clear the area around the damage
  • Open a window if you can
  • Have somewhere for us to park nearby if possible

How to get a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Advice

Should you replace it?

Many people think a damaged bath means a new one. Normally it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Kearsley. The job itself decides the price: how much damage, what it’s made of and how many items.

What you get with us

  • Nothing taken out or refitted
  • Typically one visit, start to finish
  • A fixed quote before you book
  • Honest advice, even when it means no job

Read our pricing and resurfacing vs replacement cost guide.

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

When a repair isn’t the answer

A repair isn’t right for every job, including:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath that moves underfoot, until its support is fixed
  • A bath worn all over, where resurfacing makes more sense

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Cast iron enamel
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Acrylic
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.