Herefordshire · England
Bath chip & crack repair in Kentchurch, Herefordshire
Problem with your bath in Kentchurch? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Snagging damage from a refit
Landlords, agents and businesses in Kentchurch
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Bath repair in Kentchurch without replacing anything
Most of our bath repairs take a few hours, and the bath is back in use the day after. You won’t need a plumber or tiler, because nothing is disconnected. Whether it’s a chip where the taps sit and snagging damage from a refit, we can typically put it right, on cast iron enamel, pressed steel enamel and whirlpool & spa baths alike.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Kentchurch (HR2)
- Area hub
- Herefordshire
- Cover
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What bath repair costs
Repairs from £95. Prices are worked out job by job, from your pictures. The main factors are:
- The size and number of damaged areas
- Any earlier repairs that need removing first
- The colour and finish to match
- The type of damage
Our prices are the same across the UK, so there is no premium for Kentchurch. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- The postcode, so we can plan the visit
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- The material, if you know it
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
- Free fixed quotes from pictures
Take a look at our full price list or guide to resurfacing and replacement costs.
FAQs for Kentchurch
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will the price change on the day?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Can you repair a failed DIY repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we’ll plan for it.
When a repair is not the answer
In fairness, some problems need a different fix:
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we’ll say what we think.
What we work on
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
How to look after the repair
So the finish stays in good condition for years:
- A dripping tap stains enamel, so fix it early
- Clean with warm water and a mild detergent
- If an acrylic bath flexes, have its feet adjusted
- Protect the bath with a towel when doing jobs nearby
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
How the visit works
There’s not much you need to do on the day. Show us the job, point us to the room, and we will take it from there. The job generally runs to a few hours, depending on the damage, including clearing up.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Ensure the room can be ventilated
- Mention any parking restrictions or tricky access
- Let us know which floor the room is on
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
Towns and villages near Kentchurch
What else we do in Kentchurch
Kentchurch and the surrounding area
Kentchurch is about 10 miles north-east of Abergavenny, in Herefordshire. From the centre of Kentchurch to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Kentchurch is one of 255 places in Herefordshire we cover. Our jobs stretch from Kentchurch to Birmingham (about 55 miles away).
Here we cover the HR2 postcode area. Kentchurch sits on or near the B4347, which makes travel easy. Close by, we cover Grosmont (1 mile south-west), Pontrilas (1 mile north-west), Rowlestone (2 miles west), Ewyas Harold (2 miles north-west) and Abbey Dore (4 miles north-west). We also work in nearby towns such as Hereford (11 miles north-east), Ross-on-Wye (12 miles east), Redhill (10 miles north-east), Newton Farm (9 miles north-east), Merrivale (12 miles east) and Whitecross (10 miles north-east).
Local landmarks in Kentchurch
Around Kentchurch, we work in homes near The Bridge Inn and Church of St Mary, among other places. A little further out are Kentchurch Twyn y Corras (0.7 miles south-east). For a walk, there’s Garway Hill and Ewyas Harold Meadows.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
