Gateshead · England
Bath chip & crack repair in Lintz, Gateshead
Fixed-price bath repair in Lintz and the surrounding area, normally in one visit and guaranteed for a year.
- Repairs from £95
- Rust spots around the plughole
- Cracks in an acrylic bath
Honest limits
A repair isn’t always the answer, and we’ll tell you before we start. We cannot fix:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
- A bath that moves underfoot, until its support is fixed
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
How we handle bath repair in Lintz
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We work on roll-top & freestanding, whirlpool & spa baths and acrylic, and the jobs we see most are a chipped rim or side and scuffs and scratches in the surface.
Big or small, it’s backed by a one-year guarantee in Lintz and across Gateshead.
- Where
- Lintz (NE16)
- County
- Gateshead
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
Aftercare is simple:
- If an acrylic bath flexes, have its feet adjusted
- Don’t leave a fresh chip for long
- Cover the bath during DIY or decorating
- Clean with warm water and a mild detergent
There’s nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
The process
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. It generally takes two to three hours for most chips, and you are welcome to carry on with your day while we work.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
- Open a window if you can
Ask for a price
To get a price, send two or three photos through our quote form or ring us. We will say immediately whether it can be repaired.
Related advice
Common problems we fix in Lintz
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
People typically call us when they notice something like this:
- Cracks in an acrylic bath
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
What your quote should include
- How long the guarantee is and what it covers
- What protection goes down before work starts
- What prep work is covered
- Is the price fixed, and does it include VAT?
Covering Lintz
Lintz is about 3 miles north of Annfield Plain, in Gateshead. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover all 49 towns and villages in Gateshead, from the larger towns to small villages. Our nearest city page is Newcastle upon Tyne, about 7 miles away.
Our technicians cover all of NE16. We regularly work on streets such as Syke Road, Oakleigh and The Fold and the roads around them. Other places close to Lintz include High Friarside (1 mile west), Burnopfield (1 mile north-east), Crookgate Bank (1 mile east), Rowlands Gill (1 mile north) and Lintzford (1 mile west). Larger places within reach include Gateshead (7 miles north-east), Blaydon (4 miles north), Dunston (5 miles north-east), Whickham (4 miles north-east), Ryton (5 miles north) and Winlaton (4 miles north).
Local landmarks in Lintz
We visit homes around Hookergate School, Burnopfield Primary School and St James and the streets around them. The nearest railway station is Blaydon station, roughly 4.4 miles north of the centre. Well-known places in the area include Dunston Hill Hospital (4.3 miles north-east) and Derwentside (2.7 miles south). Green spaces nearby include Currock Hill and Addison and Hedgefield Woods.
Other services in Lintz
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.
Why Lintz customers choose us
- A fixed quote before booking
- No extra charge for your area
- No need to remove anything
- Work done at your home or business
Take a look at our prices page and bath cost comparison.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Common questions in Lintz
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Is my repair covered?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Can you price it without visiting?
Nearly always. If photos do not show enough, we will ask for another angle.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you repair something that’s been repaired before?
Typically, yes. The old repair comes out first, so let us know about it.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- The type of damage
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- How easy the damage is to reach
We charge the same wherever you are, so there’s no premium for Lintz. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your photos
You can typically get a fixed quote without us visiting. To make it quick:
- A picture taken from further back
- Something in shot to show the size
- Any earlier repairs or coatings
- Natural light rather than flash
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
