Carmarthenshire · Wales
Bath chip & crack repair in Llansaint, Carmarthenshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Llansaint and across Carmarthenshire. Send pictures for a free, fixed quote.
- Repairs from £95
- Holes from dropped items
- Scuffs and scratches in the surface
Bath repair in Llansaint, done in place
A typical bath repair is a few hours’ work, and you can typically bathe again the following day. You won’t need a plumber or tiler, because nothing is disconnected. Our technicians work on cast iron enamel, whirlpool & spa baths and roll-top & freestanding, and the jobs we see most are chips along the edge of the bath and holes from dropped items.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Location
- Llansaint (SA17)
- Region
- Carmarthenshire
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Towns and villages near Llansaint
Also in Llansaint
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Llansaint customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Colours mixed by hand to suit your surface
- Honest advice, even when it means no job
- Every repair guaranteed for a year
See our prices page and resurfacing vs replacement cost guide.
What we do, step by step
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to two to three hours for most chips, tidy-up included.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Mention any earlier repairs or resurfacing
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
Get a quote
To get a price, send two or three photos through our quote form or call us. We’ll say right away if a repair is the right fix.
Related advice
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair can’t fix:
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
- Cracks in acrylic we cannot reach from underneath
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
Llansaint questions
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Will the repair show?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and you’ll get one combined price.
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
Do you work in Llansaint?
We do. Technicians travel to Llansaint from across the region, and the price is the same as everywhere else.
Can I get a quote without a visit?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
How much does bath repair cost in Llansaint?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Where we work around Llansaint
Llansaint is about 8 miles south of Carmarthen, in Carmarthenshire. Customers in Llansaint get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. We work in all 195 towns and villages in Carmarthenshire.
All of SA17 is within our area. From Heol Singleton, Y Crofft and Heol Tregwyr or a nearby road, we can come to you. If you are just outside Llansaint, we cover Broadway (1 mile north), Kidwelly (2 miles south-east), Ferryside (2 miles north-west), Llangadog (2 miles east) and Mynyddygarreg (3 miles east). Further out, we also cover Llanelli (9 miles south-east), Carmarthen (8 miles north), Llanelli Rural (9 miles south-east), Bigyn (10 miles south-east), Wern (9 miles south-east) and Ammanford (15 miles east).
Local landmarks in Llansaint
Locally, our jobs take us to homes close to Joiners Arms and All Saints' Church. For rail, the closest station is Kidwelly station, about 1.4 miles south-east of the centre. Nearby you’ll also find Cae Gaer (1.3 miles east). Not far away are Pengay.
Signs you need bath repair in Llansaint
Glass and heavy bottles cause more chips than anything else. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Most people contact us when they notice something like this:
- Scuffs and scratches in the surface
- Rust spots around the plughole
- Chips along the edge of the bath
- Damage done while the bathroom was being fitted
What your quote should include
- How to look after the finish
- How long it needs to cure
- How the colour is matched
- If travel is included in the price
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Have new chips seen to early
- Do not scrub with anything abrasive
- Put a towel in the bath if you are working above it
- Get a dripping tap fixed promptly
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
About our accreditations · Every repair comes with a one-year guarantee.
