Highland · Scotland

Bath chip & crack repair in Lybster, Highland

Our technicians come to Lybster for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.

  • Repairs from £95
  • Cracks in an acrylic bath
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Lybster homes

Bath repair at your home in Lybster

We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. We work on cast iron enamel, roll-top & freestanding and whirlpool & spa baths, and people most frequently call us about scratches you can feel with a fingernail and chips along the edge of the bath.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Area
Lybster (KW3)
Region
Highland
Cover
A year, on every repair
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

What affects the price in Lybster

Repairs from £95. Every quote is fixed and free. What we look at:

  • Whether it’s a chip, crack, burn or wear
  • How much damage there is
  • Access to the area
  • Unusual colours or finishes

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.

How to get a fixed quote

A couple of clear pictures is all it takes. Try to include:

  • Any details about the material
  • One sharp close-up of the damage
  • Details of any past repairs
  • Where you are, by postcode

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Should you replace it?

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. A repair is priced on what needs doing, not your postcode. You will see the full price before you book.

Why choose Surface Doctor in Lybster

  • Rooms protected and left tidy
  • Colour-matched on site
  • A year’s guarantee on all work
  • No extra charge for your area

Take a look at our full price list or resurfacing vs replacement cost guide.

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Do you need bath repair in Lybster?

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

Look out for any of the following:

  • Rust spots around the plughole
  • Deep scratches in acrylic
  • A failed DIY repair that’s discoloured or lifting
  • A cracked acrylic bath

Comparing quotes

  • When it can be used again
  • How your room will be protected
  • The length of the guarantee and what it covers
  • Whether there are any call-out or travel charges

10 questions to ask before booking

Materials and what they mean for the repair

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

How the visit works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which typically takes a morning or an afternoon. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, normally the following day.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Point us to the nearest place to park
  • Plan for the room to be out of bounds to pets and children

Ask for a price

The quickest way to a price is to send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.

Get a fixed quote

Read more

FAQs for Lybster

Is the work guaranteed?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

What if the damage is worse than the photos show?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What happens next?

We check the damage, the material and your postcode, then reply with a quote with dates.

Do you charge for travel?

There is no separate call-out charge. Your fixed quote includes everything.

Will there be a smell?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

Can landlords book you?

Yes, frequently. We can quote for several properties together and work between tenancies.

Landlords, agents and businesses in Lybster

If you manage property in Lybster, we will quote for several properties at once. Just send pictures for each address and we will price them together.

Landlords, letting agents and housing providers in Lybster use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Where we work around Lybster

Lybster is about 22 miles south-east of Thurso, in Highland. We visit homes and businesses in Lybster, so nothing has to leave your home. We cover 253 places in Highland, from the larger towns to small villages.

We cover every part of KW3. Jobs here include addresses on Main Street, Jeffrey Street and Russell Street and the roads around them. Other places close to Lybster include Dunbeath (6 miles south-west), Balnabruich (7 miles south-west), Thrumster (8 miles north-east), Whiterow (11 miles north-east) and Haster (11 miles north-east). If you’re somewhere remote, call first so we can plan the visit.

Local landmarks in Lybster

Our customers here include homes close to St Mary's Church. Nearby you’ll also find Swiney Castle (1.4 miles south-west) and Waterlines (less than half a mile south). Not far away are Ben-a-chielt.

Map of Lybster © OpenStreetMap contributors

When a repair is not the answer

Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:

  • Cracks in acrylic we cannot reach from underneath
  • Leaking fittings, which need a plumber
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix

Send us pictures and we will tell you honestly before you book.

Materials we repair

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.