Powys · Wales
Bath Repair for Maesmawr homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Maesmawr, carried out at your home and guaranteed for a year.
- Repairs from £95
- Cracks in an acrylic bath
- Holes from dropped items
Bath repair at your home in Maesmawr
A typical bath repair is a few hours’ work, and you can normally bathe again the day after. There is no need to book a plumber or tiler, because the bath doesn’t move. Our repair technicians work on roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and common reasons people get in touch are a kit repair that didn’t last and rusty patches near the plughole.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Maesmawr (SY17)
- Region
- Powys
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Do not scrub with anything abrasive
- Clean with warm water and a mild detergent
- A dripping tap stains enamel, so fix it early
- If an acrylic bath flexes, have its feet adjusted
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
How the visit works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to a morning or an afternoon.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Read more
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Do you need bath repair in Maesmawr?
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Clients generally contact us about:
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
- Scuffs and scratches in the surface
- A chip where the taps sit
Before you book anyone
- How long it needs to cure
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
- How your room will be protected
What a repair cannot fix
It helps to know what we can’t do:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Maesmawr
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Why repair rather than replace?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why Maesmawr clients choose us
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- Colour mixed on the day to match
- Repair technicians who travel to you, UK-wide
Take a look at our prices page or guide to resurfacing and replacement costs.
Where we work around Maesmawr
Maesmawr is about 4 miles west of Y Drenewydd, in Powys. Whether you are in the middle of Maesmawr or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Maesmawr is one of 234 places in Powys we cover. Our jobs stretch from Maesmawr to Birmingham (64 miles away).
Jobs in SY17 work the same way as everywhere else we cover. Close by, we cover Caersws (1 mile north-west), Gwerneirin (1 mile south-west), Llandinam (1 mile south), Broneiron (2 miles south-west) and Penystrywad (2 miles south). Larger places within reach include Y Drenewydd (4 miles east), Newtown and Llanllwchaiarn (5 miles east), Llanidloes (6 miles south-west), Penygloddfa (4 miles east), Pen-y-Glodfa (4 miles east) and Bryn (4 miles east).
What’s near Maesmawr
We visit homes around Caersws C.P. School and The Unicorn pub and the streets around them. The closest station to Maesmawr is Caersws station, roughly 0.8 miles north-west. Further afield, we also cover the area around Caersws Castle (0.6 miles east). Open spaces near Maesmawr include Llyn Ebyr and Cefn Lladron.
Questions from Maesmawr
Can you fix rust around the plughole?
Yes, very often. We take it back to sound metal, seal it, fill it and match the colour.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before.
Can a cracked acrylic bath be fixed?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Also near Maesmawr
What else we do in Maesmawr
About our accreditations · Every repair comes with a one-year guarantee.
