Essex · England
Bath Repair in Magdalen Laver
Bath repair in and around Magdalen Laver: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- A cracked acrylic bath
- Snagging damage from a refit
How we handle bath repair in Magdalen Laver
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour-matched so it blends in. We are often asked to fix rust by the waste and overflow and deep scratches in acrylic, in cast iron enamel, acrylic and whirlpool & spa baths.
All our work is covered by our one-year guarantee.
- Location
- Magdalen Laver (CM5)
- Region
- Essex
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Magdalen Laver
Magdalen Laver is about 3 miles east of Harlow, in Essex. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover all 644 towns and villages across Essex. We work right across the region, from Magdalen Laver to London (21 miles away).
Here we cover the CM5 postcode area. We also travel to Loyter's Green (1 mile north), Foster Street (1 mile west), Hastingwood (1 mile west), Housham Tye (2 miles north) and Matching Tye (2 miles north). Larger places within reach include Chelmsford (13 miles east), Harlow (3 miles west), Brentwood (10 miles south-east), Billericay (13 miles south-east), Loughton (9 miles south-west) and Waltham Abbey (9 miles south-west).
Landmarks near Magdalen Laver
We visit homes around The Green Man Public House and Parish Church of St Mary Magdalen, among other places. The closest station to Magdalen Laver is Harlow Mill station, roughly 3.4 miles north-west of the centre. Nearby you will also find Harlow Mill (3.6 miles north-west) and Mark Hall Cycle Museum (3.2 miles north-west). Not far away are Gernon Bushes.
Places near Magdalen Laver
Also in Magdalen Laver
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for two to three hours for most chips. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
How to prepare
- Let the surface dry out before the visit
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
Getting a price
Send us photos of the damage and one of the entire item, and tell us you are in Magdalen Laver, and we will reply with a fixed quote.
Related advice
Keeping it looking good
Once the work has cured, treat it gently:
- Rinse it down after each bath
- Keep abrasive pads and gritty cleaners away from the bath
- Do not leave a fresh chip for long
- Check that an acrylic bath doesn’t move when you stand in it
There is nothing special to do after a repair. Skip bleach and gritty creams.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Why Magdalen Laver clients choose us
- We will tell you if it’s not worth repairing
- Nothing taken out or refitted
- One price list for the entire UK
- We come to you, anywhere in the UK
Read our full price list and bath cost comparison.
Prices and what affects them
Prices start from £95. We price every job individually, from your pictures. What matters most is:
- Access to the area
- How much damage there is
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Send pictures for a quote
Most quotes are done from photos alone. To make it quick:
- Your postcode, so we can check dates
- Details of any past repairs
- A wider photo showing the whole bath
- One sharp close-up of the damage
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Do you need bath repair in Magdalen Laver?
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Common reasons people in Magdalen Laver contact us are:
- Hairline or through cracks in acrylic
- A kit repair that didn’t last
- Chips on the rim or sides
- Scratches you can feel with a fingernail
Comparing quotes
- How to look after the finish
- The length of the guarantee and what it covers
- Whether a trained technician does the job
- What preparation is included
Honest limits
It helps to know what we can’t do:
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
Send us photos and we will tell you honestly.
Materials we work on in Magdalen Laver
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Questions from Magdalen Laver
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Essex.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
About our accreditations · Every repair comes with a one-year guarantee.
