Lincolnshire · England
Bath chip & crack repair in Manby, Lincolnshire
Fixed-price bath repair in Manby and the surrounding area, generally in one visit and guaranteed for a year.
- Repairs from £95
- Chips under the taps
- Chips on the rim or sides
Bath repair at your home in Manby
You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. We work on pressed steel enamel, cast iron enamel and whirlpool & spa baths, and people most often call us about chips caused by builders and a hole punched through by something heavy.
Whatever the size of the job, it’s backed by a one-year guarantee in Manby and across Lincolnshire.
- Area
- Manby (LN11)
- Region
- Lincolnshire
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Manby: your questions answered
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How long before I can use the bath?
Normally by the following day, though it depends on what we have done.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
What we do, step by step
The work is clean and fairly quiet. Protection goes down first, then the job itself takes a few hours. Before we leave, we explain how soon it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
- Mention any earlier repairs or resurfacing
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
Nearby places to Manby
More services for Manby
How to care for the repair
Once the work has cured, treat it gently:
- If an acrylic bath flexes, have its feet adjusted
- Do not leave razors or cans standing in the bath
- Avoid scourers, wire wool and gritty cream cleaners
- Use a soft cloth and washing-up liquid for everyday cleaning
Leave the repair to cure for as long as we say before running a bath. From then on, mild cleaning is all it needs.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
What we can’t put right
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Leaking fittings, which need a plumber
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. Compared with replacing, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why choose Surface Doctor in Manby
- Repair technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
- A fixed quote before you book
- Honest advice, even when it means no job
Take a look at our full price list and bath cost comparison.
Landlord and trade work in Manby
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
About Manby
Manby is about 4 miles east of Louth, in Lincolnshire. Anywhere in LN11, a technician comes to you. Manby is one of 732 places in Lincolnshire we cover. Our jobs stretch from Manby to Leeds (about 74 miles away).
Here we cover the LN11 postcode area. From St Mary's Crescent, Provost Road and Chapel Lane or a nearby road, a technician can come to you. Close by, we cover Grimoldby (1 mile north-west), South Cockerington (2 miles north-west), North Reston (2 miles south-west), Stewton (2 miles west) and Castle Carlton (2 miles south). Within a short drive, we also cover Louth (4 miles west), New Waltham (13 miles north-west), Horncastle (14 miles south-west), Mablethorpe (7 miles east), Humberston (13 miles north-west) and Sutton on Sea (8 miles south-east).
Landmarks near Manby
In Manby, that means homes near Grimoldby Primary School and Church of St Mary, among other places. Well-known places in the area include County Hospital Louth (4.5 miles west).
How we price bath repair
Prices start from £95. We price every job individually, from your photos. The main factors are:
- Where the damage is and how we get to it
- The material and finish
- How many areas need work
- The type of damage
The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
How to get a fixed price
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- Details of any past repairs
- A picture taken from further back
- Something in shot to show the size
- One sharp close-up of the damage
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
