Essex · England
Bath Repair in Maple End
Bath repair in Maple End without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Repairs from £95
- Holes from dropped items
- Damage done while the bathroom was being fitted

Can I fix it myself?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Bath repair at your home in Maple End
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. Our technicians work on roll-top & freestanding, pressed steel enamel and cast iron enamel, and people most frequently call us about impact holes in acrylic and a kit repair that didn’t last.
Big or small, you get the same one-year guarantee.

- Location
- Maple End (CB10)
- County
- Essex
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Maple End
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
These are the problems we’re asked about most:
- A cracked acrylic bath
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
- A chip where the taps sit
Questions to ask before booking
- What prep work is covered
- If travel is included in the price
- How to care for the finish
- Is the price fixed, and does it include VAT?
How to look after the repair
Simple care helps the repair last. Our advice:
- Store metal items away from the bath
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
- Cover the bath during DIY or decorating
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with no extras added later.
Why book with us
- No need to remove anything
- We come to you, anywhere in the UK
- We’ll tell you if it’s not worth repairing
- Dust sheets down, tidy finish
See our full price list or guide to resurfacing and replacement costs.
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for a morning or an afternoon. Before leaving, we tell you how long to leave it and how to care for it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Clear the area around the damage
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
Get a quote
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Also near Maple End
More services for Maple End
Landlords, agents and businesses in Maple End
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
When a repair is not the answer
We will not take on work that won’t last, so here’s what a repair cannot put right:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send photos and we will give you a straight answer.
What we work on
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Maple End questions
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How long before I can use the bath?
Normally by the following day, depending on the repair.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Do you come to Maple End?
Yes, we do. We send a technician to Maple End for every job, and the price is the same as everywhere else.
Maple End and nearby
Maple End is about 3 miles east of Saffron Walden, in Essex. We visit homes and businesses in Maple End and the surrounding area, so you don’t need to take anything anywhere. We cover all 644 towns and villages in Essex, from the larger towns to small villages. You can also see our page for London, about 40 miles away.
We work across CB10. We also cover the places around Maple End: Radwinter (1 mile east), Wimbish (1 mile south-west), The Common (1 mile north-east), Hempstead (2 miles east) and Church End (3 miles north). Within a short drive, we also cover Braintree (13 miles south-east), Saffron Walden (3 miles west), Halstead (14 miles east), Great Dunmow (10 miles south), Stansted Mountfitchet (9 miles south-west) and Great Notley (13 miles south-east).
Around Maple End
We visit homes around Church of All Saints and Radwinter Church of England Voluntary Aided Primary School, among other places. A little further out are Saffron Walden Community Hospital (3 miles west) and Castle Camps (3.7 miles north-east). The countryside around Maple End includes Hales and Shadwell Woods.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.

