Norfolk · England
Bath Repair in Marham
Fixed-price bath repair in Marham and the surrounding area, generally in one visit and guaranteed for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- A kit repair that didn’t last
How we price bath repair
Prices start from £95. You will know the full cost before you book. We take into account:
- Where the damage is and how we get to it
- How much damage there is
- Any earlier repairs that need removing first
- Doing more than one item at once
Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Before you send pictures, these tips help us give you a firm price:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- Details of any past repairs
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
About our bath repair in Marham
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, generally in a single visit. We are frequently asked to fix rust by the waste and overflow and chips under the taps, across roll-top & freestanding, acrylic and whirlpool & spa baths.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Location
- Marham (PE33)
- Region
- Norfolk
- Warranty
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath repair in Marham
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
How much does bath repair cost in Marham?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Is a holed acrylic bath repairable?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Do you cover the whole of Norfolk?
Everywhere in the UK, Marham included. Travel is included in the price.
Should you replace it?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. We charge the same wherever you are, with no extra for Marham. What changes the price is the job itself: the material, the amount of damage and how many items.
Why choose Surface Doctor in Marham
- Same prices wherever you are
- Typically one visit, start to finish
- A fixed quote before you book
- We leave the room as we found it
See our pricing or guide to resurfacing and replacement costs.
About Marham
Marham is about 8 miles south-east of King's Lynn, in Norfolk. Anywhere in PE33, a technician comes to you. Our repair technicians cover 797 places across Norfolk.
Our visits in PE33 are booked in the same way as anywhere else. Streets in the area include The Street, School Lane and Bell Close. If you’re just outside Marham, we cover Shouldham (2 miles west), Fincham (3 miles south-west), Barton Bendish (3 miles south), Pentney (3 miles north-east) and Narborough (3 miles north-east). Further out, we also cover King's Lynn (8 miles north-west), Downham Market (7 miles south-west), Watton (14 miles south-east), Swaffham (7 miles east), Fairstead (7 miles north-west) and West Lynn (9 miles north-west).
Near you in Marham
Locally, our jobs take us to homes close to Cherry Tree Academy Trust Marham Junior and Church of Holy Trinity. A little further out are Marham Castle (less than half a mile south-west).
What a repair cannot fix
A repair is not always the answer, and we would rather say so up front. We can’t fix:
- Cracks in acrylic we cannot reach from underneath
- Flexing caused by a failed cradle or loose feet
- Wear across the entire surface, which needs re-enamelling
If in doubt, send photos and we’ll say what we think before you book.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Do you need bath repair in Marham?
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Signs it’s time to call us include:
- A failed DIY repair that’s discoloured or lifting
- Chips along the edge of the bath
- Cracks in an acrylic bath
- Deep scratches in acrylic
Before you book anyone
- Who turns up on the day
- Aftercare advice
- What the guarantee covers, and for how long
- How changes to the job are handled
The process
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for a few hours. Before leaving, we tell you how long to leave it and how to care for it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Point us to the nearest place to park
- Open a window if you can
- Avoid using the area for a few hours before we arrive
Ask for a price
Most customers in Marham get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Looking after it afterwards
Looking after the surface is easy:
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse it down after each bath
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Nearby places to Marham
Other services in Marham
About our accreditations · Every repair comes with a one-year guarantee.
