Northamptonshire · England
Bath Repair for Marston Trussell homes
We travel to Marston Trussell for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a few hours. If anything looks different from your photos, we will talk to you before going ahead.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Make sure the area is dry
- Point us to the nearest place to park
- Let us know about parking or access
Get a quote
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
Bath repair at your home in Marston Trussell
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Our technicians work on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding, and people most often call us about chips under the taps and hairline or through cracks in acrylic.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Marston Trussell (LE16)
- Region
- Northamptonshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Marston Trussell
What else we do in Marston Trussell
How we price bath repair
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- Access to the area
- Doing more than one item at once
Our prices are the same across the UK, so there’s no premium for Marston Trussell. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
Phone photos are fine, there is no need for anything special. Just make sure we can see:
- Your postcode, so we can check dates
- What it’s made of, if you know
- A clear, close picture of the problem area
- Natural light rather than flash
Email us a picture of the damage and one of the whole item, and tell us you’re in Marston Trussell, and we will reply with a fixed price.
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Marston Trussell and nearby
Marston Trussell is about 3 miles west of Market Harborough, in Northamptonshire. Customers in Marston Trussell get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We work in all 364 towns and villages across Northamptonshire, from the larger towns to small villages. We work right across the region, from Marston Trussell to Birmingham (about 38 miles away).
We work across the LE16 postcode area. Streets in the area include Lubenham Road and Theddingworth Road, and we cover them all. We also cover the places around Marston Trussell: Lubenham (1 mile north-east), East Farndon (2 miles east), Gartree (2 miles north), Market Harborough (3 miles east) and Clipston (3 miles south-east). We also work in nearby towns such as Corby (12 miles east), Kettering (12 miles south-east), Desborough (7 miles east), Moulton (14 miles south-east), Burton Latimer (15 miles south-east) and Rothwell (8 miles east).
Near you in Marston Trussell
We visit homes around Church of St Nicholas and Lubenham All Saints Church of England Primary School and the streets around them. For rail, the closest station is Market Harborough station, about 3.2 miles east.
When we’d advise against a repair
It helps to know what we can’t do:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
FAQs for Marston Trussell
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
When can I have a bath again?
Usually the next day. We will tell you the exact curing time when we finish.
Can you fix rust around the plughole?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
What happens after I send pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Will the price change on the day?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Do you need bath repair in Marston Trussell?
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.
Look out for these signs:
- A failed DIY repair that is discoloured or lifting
- A chipped rim or side
- Impact holes in acrylic
- Damage beneath the taps
What your quote should include
- How long it needs to cure
- Who will actually do the work
- How long the guarantee is and what it covers
- How the room is protected while they work
Landlord and trade work in Marston Trussell
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
For anyone letting property in or around Marston Trussell, we will quote for several properties at once. Send photos for each one and we’ll price them together.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Aftercare tips
Most damage we see is avoidable. These habits help:
- Fix dripping taps early to stop staining and limescale
- If an acrylic bath flexes, have its feet adjusted
- Use a soft cloth and washing-up liquid for everyday cleaning
- Store metal items away from the bath
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
