Surrey · England
Bath Repair for Mayford homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Mayford, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
FAQs for Mayford
How do I book?
Use the quote form or ring 0345 017 0787.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
When can I have a bath again?
Normally the next day. We confirm the time before we leave.
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
How much does bath repair cost in Mayford?
Prices start from £95. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
What areas do you cover?
Across the UK. Our prices are the same everywhere.
Something went through my bath. Can it be fixed?
Normally. Photos of the hole and the underside help us check.
Bath repair at your home in Mayford
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We regularly repair roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and people most frequently call us about rusty patches near the plughole and a hole punched through by something heavy.
Whatever the size of the job, it’s backed by a one-year guarantee in Mayford and across Surrey.
- Location
- Mayford (GU22)
- Area hub
- Surrey
- Cover
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Mayford?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Why choose Surface Doctor in Mayford
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
- Same prices wherever you are
- Honest advice, even when it means no job
See our full price list and resurfacing vs replacement cost guide.
About Mayford
Mayford is about 1 mile south of Woking, in Surrey. Customers in Mayford get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. Mayford is one of 395 towns and villages in Surrey where we work. Our nearest city page is London, about 25 miles away.
We cover every part of the GU22 postcode area and the streets around it. We regularly work on streets such as Moor Lane, Egley Road and Bonsey Lane and the roads around them. Other places close to Mayford include Pyle Hill (1 mile south-west), Sutton Green (1 mile south), Send (2 miles east), Jacobs Well (2 miles south) and Send Marsh (2 miles east). We also work in nearby towns such as Guildford (3 miles south), Camberley (7 miles west), Epsom (13 miles east), Farnham (12 miles south-west), Ewell (14 miles east) and Egham (9 miles north).
Landmarks near Mayford
Our customers here include homes close to Hoe Valley School, St Mark's Church and Drumming Snipe pub. Other local landmarks include Westfield Primary School (under half a mile north), Mayford Meadows (less than half a mile north-west) and Hoe Valley School (under half a mile north-west). Mayford’s nearest station is Worplesdon station, roughly 0.9 miles south-west. Other landmarks nearby include The Peacocks (1.7 miles north) and Woking Community Hospital (1.4 miles north). Open spaces near Mayford include Pewley Hill and Papercourt Marshes.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Get any new chip repaired before it rusts
- Check that an acrylic bath does not move when you stand in it
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Landlords, agents and businesses in Mayford
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Nearby places to Mayford
More services for Mayford
What we are called out for in Mayford
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
Send us a photo if you notice any of these:
- Impact holes in acrylic
- Rust spots around the plughole
- A cracked acrylic bath
- Chips under the taps
Comparing quotes
- How the room is protected while they work
- What aftercare is recommended
- Who turns up on the day
- How changes to the job are handled
When a repair is not the answer
Before booking, it’s worth knowing the limits too:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
- Rust that has eaten right through a steel bath
Send us photos and we’ll tell you honestly.
Materials we repair
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
What we do, step by step
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. The work itself takes two to three hours for most chips, and we leave the room as we found it.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the following day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Read more
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
