Devon · England
Bath Repair in Mid Devon
Bath repair for Mid Devon, without a refit. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Rust by the waste and overflow
- A kit repair that didn’t last
Bath repair in Mid Devon without replacing anything
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Typical jobs include rusty patches near the plughole and scratches you can feel with a fingernail, in whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Mid Devon (EX18)
- Area hub
- Devon
- Guarantee
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
Nothing complicated is needed:
- Fix dripping taps early to stop staining and limescale
- Avoid scourers, wire wool and gritty cream cleaners
- Clean with warm water and a mild detergent
- Cover the bath during DIY or decorating
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Nearby places to Mid Devon
Also in Mid Devon
What a repair can’t fix
We will not take on work that won’t last, so here’s what a repair cannot put right:
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
- Leaking fittings, which need a plumber
Send us photos and we’ll tell you honestly before you book.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
What your bath is made of matters
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How we price bath repair
Prices start from £95. We price every job individually, from your pictures. The main factors are:
- How much damage there is
- Previous DIY repairs that have to come out
- The colour and finish to match
- Where the damage is and how we get to it
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- Where you are, by postcode
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Something in shot to show the size
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
For landlords and businesses
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Mid Devon use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Mid Devon and nearby
Mid Devon is about 17 miles south-east of Barnstaple, in Devon. Across the EX18 area, a technician comes to you. We work in 586 places in Devon, from the larger towns to small villages.
We cover every part of EX18 and the streets around it. Close by, we cover Coldridge (2 miles east), Eggesford (3 miles north), Zeal Monachorum (4 miles south-east), Lapford (4 miles east) and Chawleigh (4 miles north-east). Further out, we also cover Okehampton (9 miles south-west), Crediton (11 miles east), South Molton (12 miles north), Great Torrington (13 miles north-west), Hatherleigh (8 miles west) and North Tawton (4 miles south).
Local landmarks in Mid Devon
We visit homes around Church of St Mary the Virgin, among other places. The nearest railway station is Eggesford station, about 2.7 miles north of the centre. A little further out are Millsome Castle (1 mile south).
Questions from Mid Devon
Can you repair a crack in an acrylic bath?
Generally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
What happens if you find more damage?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
When can I have a bath again?
Typically the next day. We’ll tell you the exact curing time when we finish.
Do you work in Mid Devon?
Yes, we do. We send a technician to Mid Devon for every job, and the price is the same as everywhere else.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Is there a call-out fee?
We don’t add a call-out fee. The fixed price covers the visit and the work.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which typically takes two to three hours for most chips. If anything looks different from your pictures, we will talk to you before going ahead.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Tell us if there are stairs or a lift
- Make sure the room can be ventilated
- Point us to the nearest place to park
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Advice
Do you need bath repair in Mid Devon?
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
These are the problems we are asked about most:
- A failed DIY repair that is discoloured or lifting
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
- Damage beneath the taps
What to look for in a quote
- If travel is included in the price
- What the guarantee covers, and for how long
- How the colour is matched
- When it can be used again
About our accreditations · Every repair comes with a one-year guarantee.
