Dumfries and Galloway · Scotland

Bath Repair for Moffat homes

We travel to Moffat for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Scuffs and scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Moffat

About our bath repair in Moffat

Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We regularly repair cast iron enamel, roll-top & freestanding and whirlpool & spa baths, and people most frequently call us about an old repair that has yellowed or come loose and scratches you can feel with a fingernail.

All our work is covered by our one-year guarantee.

Where
Moffat (DG10)
County
Dumfries and Galloway
Warranty
One year on every repair
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

FAQs for Moffat

Can you repair something that’s been repaired before?

Generally, yes. Tell us what was done before and we will plan for it.

Can you repair a failed DIY repair?

Regularly. We strip it out, deal with any rust and repair it again.

Will I be able to see the repair?

On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.

Can you repair a chip on a coloured bath?

Yes, coloured baths are no problem. We tint the finish to your bath on site.

Does someone need to be in?

Someone needs to let us in and show us the job. You don’t need to watch us work.

How do I get a price for bath repair in Moffat?

Repairs from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.

Will the repair last?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

How we price bath repair

Repairs from £95. You’ll know the full cost before you book. We look at:

  • How much damage there is
  • What kind of damage it is
  • Unusual colours or finishes
  • Where the damage is and how we get to it

A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

How to get a fixed price

You can typically get a fixed price without us visiting. To help us price it:

  • Daylight if possible, and no flash reflection
  • The postcode, so we can plan the visit
  • Something in shot to show the size
  • The material, if you know it

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.

Landlords, agents and businesses in Moffat

Housing associations and facilities teams use us for planned and reactive repairs in Dumfries and Galloway and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

For developers and builders, we fix damage before handover. Several plots can be done in one visit.

Repair or replace: which is better?

Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Our bath repair starts from £95. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.

Why choose Surface Doctor in Moffat

  • A fixed quote before booking
  • Nothing taken out or refitted
  • One price list for the whole UK
  • We come to you, anywhere in the UK

See our pricing or resurfacing vs replacement cost guide.

Do you need bath repair in Moffat?

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.

Keep an eye out for any of the following:

  • Chips caused by builders
  • Chips along the edge of the bath
  • Rusty patches near the plughole
  • Chips under the taps

Comparing quotes

  • How the colour is matched
  • How the room is protected while they work
  • When it can be used again
  • Who turns up on the day

Our hiring checklist

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

Different materials, different repairs

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • Stick to mild cleaners and a soft cloth
  • Put a towel in the bath if you’re working above it
  • Have new chips seen to early
  • Avoid scourers, wire wool and gritty cream cleaners

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath without abrasive products.

Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

What happens on the day

We agree an arrival time beforehand, so you know when to expect us. On site, it takes a morning or an afternoon in most cases. We leave the room clean and you will know when it can be used.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Preparing for the visit

  • Point us to the nearest place to park
  • Let us know which floor the room is on
  • Avoid using the area for a few hours before we arrive

Ask for a price

Most clients in Moffat get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Read more

Moffat and nearby

Moffat is about 19 miles north of Dumfries, in Dumfries and Galloway. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Our technicians cover 138 places across Dumfries and Galloway, from the larger towns to small villages. We work right across the region, from Moffat to Edinburgh (43 miles away).

Postcode districts we cover here: DG10. From High Street, Mansfield Place and Star Street or a nearby road, we can come to you. Main roads around Moffat include the A701 and A708, so getting to you is simple. Other places close to Moffat include Beattock (2 miles south), Newton Wamphray (7 miles south), Johnstonebridge (8 miles south), Elvanfoot (11 miles north-west) and Crawford (12 miles north-west). We also work in nearby towns such as Lockerbie (15 miles south), Lochmaben (14 miles south) and Thornhill (14 miles south-west). Moffat is one of the larger places we cover in Dumfries and Galloway.

Landmarks near Moffat

Our customers here include homes close to Moffat Academy, Star Hotel and St John's Episcopal Church, among other places. A little further out are Lothlorien Emporium And Toy Museum (less than half a mile west) and Auchen Castle (1.5 miles west). Green spaces nearby include Croft Head.

Map of Moffat © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.