Greater London · England

Bath chip & crack repair in Moor Park, Greater London

Bath repair for Moor Park, without a refit. Send us photos for a fixed quote, then book a visit.

  • Repairs from £95
  • Rusty patches near the plughole
  • A chip where the taps sit
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Moor Park homes

Repairing versus replacing in Moor Park

Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

What you get with us

  • Most jobs done in one visit
  • Colour mixed on the day to match
  • Repair technicians who travel to you, UK-wide
  • A fixed quote before you book

Take a look at our pricing or guide to resurfacing and replacement costs.

About our bath repair in Moor Park

Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, usually in a single visit. We work on pressed steel enamel, cast iron enamel and roll-top & freestanding, and people most often call us about an old repair that has yellowed or come loose and a cracked acrylic bath.

Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Location
Moor Park (HA6, WD3)
County
Greater London
Warranty
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026

Work for landlords and builders

If you manage property in Moor Park, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.

Landlords, letting agents and housing providers in Moor Park use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.

What happens on the day

Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Let us know about parking or access
  • Keep a parking space free if you can
  • Make sure the area is dry

Get a quote

Upload pictures of the damage and a wider shot of the whole item, and tell us you’re in Moor Park, and we will come back with a fixed quote.

Send pictures for a quote

Related advice

Questions from Moor Park

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Can a cracked acrylic bath be fixed?

Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.

Which areas do you work in?

We cover the whole UK, including Moor Park and the rest of Greater London. Just include your postcode and we will confirm dates.

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Something went through my bath. Can it be fixed?

Often, if there’s access underneath. We back the hole, fill it and refinish the surface.

Can you repair a failed DIY repair?

Yes. We take out the old repair and do it properly. Mention it when you send pictures.

Can you repair something that is been repaired before?

Yes, regularly. It can add a little time, which we include in the quote.

How invisible is a bath repair?

On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.

About Moor Park

Moor Park is about 2 miles south-east of Rickmansworth, in Greater London. Across the HA6 area, we carry out the work at your property. We cover all 764 towns and villages in Greater London. You can also see our page for London, about 17 miles away.

Postcode districts we cover here: HA6 and WD3. Whether you live on Bedford Road, Ormonde Road and Russell Road or a nearby road, a technician can come to you. If you are just outside Moor Park, we cover Batchworth Heath (1 mile west), Northwood (1 mile south-east), Eastbury (1 mile east), Batchworth (1 mile west) and Woodcock Hill (2 miles west). Within a short drive, we also cover City of Westminster (14 miles south-east), Marylebone (14 miles south-east), Kensington (13 miles south-east), St Pancras (15 miles south-east), Hampstead (12 miles south-east) and Ruislip (3 miles south).

What’s near Moor Park

We visit homes around The Prince of Wales pub, Eastbury Farm Primary School and Rickmansworth School, among other places. You will also find King George V Playing Fields (1.4 miles north-east), St Martins School Northwood (0.5 miles south) and Holy Trinity Church (0.7 miles south). Moor Park’s nearest station is Rickmansworth station, roughly 2.1 miles north-west of the centre. Well-known places in the area include Hilfield Castle (4.7 miles north-east) and Harlequin Centre (2.8 miles north-east). For a walk, there’s Dews Farm Sand Pits and Tumbling Bay.

  • Parks and local facilities nearby include Maple Cross and Mill End (2.6 miles west)
Map of Moor Park © OpenStreetMap contributors

What bath repair costs

Prices start from £95. We price every job individually, from your pictures. What matters most is:

  • Any earlier repairs that need removing first
  • The type of damage
  • How easy the damage is to reach
  • The material

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

How to get a fixed quote

You can take the photos on your phone. Just ensure we can see:

  • The postcode, so we can plan the visit
  • A clear, close picture of the problem area
  • The material, if you know it
  • Details of any past repairs

For a price in Moor Park, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Repairs by material

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.

Looking after it afterwards

It’s all simple stuff:

  • Check that an acrylic bath does not move when you stand in it
  • Store metal items away from the bath
  • Cover the bath during DIY or decorating
  • Avoid scourers, wire wool and gritty cream cleaners

Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

What we are called out for in Moor Park

Rust generally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

If you can see any of these, send us a photo:

  • Snagging damage from a refit
  • Holes from dropped items
  • Deep scratches in acrylic
  • Rust spots around the plughole

What your quote should include

  • Is the price fixed, and does it include VAT?
  • How soon you can use it again
  • Whether a trained technician does the job
  • What happens if the damage is worse than the photos show

Our hiring checklist

Can I fix it myself?

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.