Lincolnshire · England
Bath chip & crack repair in Moor Side, Lincolnshire
Local bath repair for Moor Side: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rust spots around the plughole
- A kit repair that didn’t last
Why repair rather than replace?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. A repair skips all of it. Prices start from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why book with us
- Most jobs done in one visit
- Repair technicians who travel to you, UK-wide
- Colours mixed by hand to suit your surface
- No need to remove anything
Take a look at our pricing and resurfacing vs replacement cost guide.
Bath repair in Moor Side, done in place
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. Typical jobs include rust spots around the plughole and holes from dropped items, in cast iron enamel, pressed steel enamel and whirlpool & spa baths.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Moor Side (PE22)
- Area hub
- Lincolnshire
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Moor Side
Prices start from £95. Prices are worked out job by job, from your photos. What matters most is:
- What kind of damage it is
- What the surface is made of
- How much damage there is
- Unusual colours or finishes
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from pictures
You can typically get a fixed price without us visiting. To make it quick:
- A coin beside the damage so we can judge size
- A picture taken from further back
- One sharp close-up of the damage
- The material, if you know it
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Repairs by material
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
What we can’t put right
A repair is not right for every job, including:
- Metal that has corroded all the way through
- A bath that moves underfoot, until its support is fixed
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Moor Side
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Covering Moor Side
Moor Side is about 10 miles north-west of Boston, in Lincolnshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. We cover 732 places in Lincolnshire. Our jobs stretch from Moor Side to Leeds (76 miles away).
We work across the PE22 postcode area. That includes homes on Sandy Bank and Langrick Road and the roads around them. Neighbouring places we cover include Coningsby (1 mile west), Tattershall Thorpe (2 miles north-west), Tattershall (2 miles west), Kirkby on Bain (3 miles north) and Haltham (4 miles north). Larger places within reach include Boston (10 miles south-east), Sleaford (14 miles south-west), Horncastle (7 miles north), Woodhall Spa (5 miles north-west), Witham (9 miles south-east) and Staniland (10 miles south-east).
Local landmarks in Moor Side
In Moor Side, that means homes near The Barnes Wallis Academy and Lea Gate Public House, among other places. Nearby you’ll also find Tattershall Castle (2.3 miles west) and Battle Of Britain Memorial Flight Visitor Centre (1.7 miles west). Green spaces nearby include Heath's Meadows.
What happens on the day
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a few hours, depending on the damage, and you are welcome to carry on with your day while we work.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
- Open a window if you can
Get a quote
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Read more
For landlords and businesses
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
We carry out planned and one-off repairs for housing associations and facilities teams in Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
When to call us in Moor Side
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
Customers usually contact us about:
- Scratches you can feel with a fingernail
- Damage done while the bathroom was being fitted
- A kit repair that didn’t last
- A cracked acrylic bath
What your quote should include
- Whether the colour is mixed to match
- Who will actually do the work
- What the guarantee covers, and for how long
- How soon you can use it again
Nearby places to Moor Side
More services for Moor Side
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Questions from Moor Side
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Can you repair a hole in a bath?
In most cases. Send us a picture of the hole and one from under the bath if you can.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Do you cover Moor Side?
Yes. We work across the UK and travel to Moor Side and the rest of Lincolnshire. Send photos and we will quote, or call 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.
