Doncaster · England

Bath Repair for Moorends homes

Bath repair in Moorends without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Repairs from £95
  • Hairline or through cracks in acrylic
  • Chips caused by builders
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Moorends homes

Why repair rather than replace?

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there’s no premium for Moorends. The job itself decides the price: how much damage, what it’s made of and how many items.

Why us?

  • CHAS, Constructionline and SafeContractor accredited
  • Every repair guaranteed for a year
  • Nothing taken out or refitted
  • We leave the room as we found it

Take a look at our prices page or resurfacing vs replacement cost guide.

Bath repair in Moorends, done in place

A damaged bath doesn’t have to mean a new bathroom. Our technicians fill, shape and refinish the damage, mixing the colour on the day. We work on cast iron enamel, pressed steel enamel and roll-top & freestanding, and people most often call us about deep scratches in acrylic and rust spots around the plughole.

All of our repairs are guaranteed for twelve months in Moorends and everywhere else. We return to put right any problem with the work.

Area
Moorends (DN8)
County
Doncaster
Guarantee
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Prices and what affects them

Prices start from £95. There are no hourly rates or hidden extras. The price is based on:

  • Unusual colours or finishes
  • Whether old repairs or coatings need taking off
  • What kind of damage it is
  • How much damage there is

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

Quotes from your pictures

When you take your pictures, these tips help us give you a firm price:

  • A wider photo showing the whole bath
  • Daylight if possible, and no flash reflection
  • A clear, close picture of the problem area
  • Whether it’s been repaired or coated before

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Landlords, agents and businesses in Moorends

If you manage property in Moorends, we can repair and quote for several addresses together. Send photos for each one and we will price them together.

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

Questions from Moorends

Can you redo someone else’s repair?

Yes, regularly. It can add a little time, which we include in the quote.

Which areas do you work in?

We cover the entire UK, including Moorends and the rest of Doncaster. Just include your postcode and we’ll offer you dates.

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

What do you need from me?

Send photos through the quote form or call 0345 017 0787, and we will take it from there.

Do you repair coloured baths?

Yes, we match coloured baths too. We tint the finish to your bath on site.

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Can you redo an old repair?

Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.

How much does bath repair cost in Moorends?

Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up and a picture of the entire item with your DN8 postcode.

Looking after it afterwards

Simple care helps the repair last. Our advice:

  • Stick to mild cleaners and a soft cloth
  • Protect the bath with a towel when doing jobs nearby
  • Store metal items away from the bath
  • Avoid scourers, wire wool and gritty cream cleaners

Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.

Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.

How the visit works

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take two to three hours for most chips. We tidy up before we leave and let you know when you can use it again.

  1. First, we check the damage against your photos and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Have a window or extractor fan available
  • Tell us about any previous repairs or coatings
  • Make sure the area is dry

Ask for a price

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Send photos for a quote

Read more

DIY kit or professional repair?

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

What we are called out for in Moorends

Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.

People typically call us after spotting one of these:

  • Cracks in an acrylic bath
  • Scratches you can feel with a fingernail
  • Rust by the waste and overflow
  • Chips caused by builders

Before you book anyone

  • How the colour is matched
  • What aftercare is recommended
  • How long the guarantee is and what it covers
  • Who will actually do the work

Our hiring checklist

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Moorends and the surrounding area

Moorends is about 1 mile north of Thorne, in Doncaster. Across the DN8 area, we carry out the work at your property. We work in 89 places in Doncaster, from the larger towns to small villages. Our jobs stretch from Moorends to Leeds (about 27 miles away).

All of DN8 is covered. Local streets include Geneva Square, Thrislington Square and The Hermitage. If you are just outside Moorends, we cover Thorne (1 mile south), Wormley Hill (2 miles west), Pincheon Green (3 miles north-west), Fishlake (3 miles south-west) and Far Bank (3 miles west). We also work in nearby towns such as Doncaster (10 miles south-west), Adwick le Street (11 miles west), Bentley (10 miles south-west), Armthorpe (8 miles south-west), New Rossington (12 miles south-west) and Intake (11 miles south-west).

Landmarks near Moorends

In Moorends, that means homes near Trinity Academy, Thorne Moorends West Road Primary School and Thorne and Hatfield Moors and the streets around them. The nearest railway station is Thorne North station, about 1.4 miles south-west of the centre.

Map of Moorends © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.