Isle of Wight · England
Bath chip & crack repair in Moortown, Isle of Wight
Our repair technicians come to Moortown for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- Deep scratches in acrylic
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Bath repair at your home in Moortown
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on acrylic, whirlpool & spa baths and cast iron enamel, and common reasons people get in touch are chips caused by builders and a failed DIY repair that’s discoloured or lifting.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Where
- Moortown (PO30)
- Region
- Isle of Wight
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath repair in Moortown
What does bath repair cost?
Repairs from £95. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
Is a holed acrylic bath repairable?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we will ask for another angle.
What happens after I send photos?
We come back with a fixed price, generally with dates to choose from. You are under no obligation.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Repair or replace: which is better?
Replacing a fitted bath normally means a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. The price reflects the work involved, not your postcode. You will see the full price before booking, with no extras added later.
What you get with us
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
- Same prices wherever you are
- We’ll tell you if it’s not worth repairing
Read our pricing and bath cost comparison.
Signs you need bath repair in Moortown
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Clients typically contact us about:
- Cracks in an acrylic bath
- Holes from dropped items
- Scuffs and scratches in the surface
- A chipped rim or side
Questions to ask before you book
- Aftercare advice
- How long the guarantee is and what it covers
- How soon you can use it again
- If travel is included in the price
Moortown and nearby
Moortown is about 6 miles south-west of Newport, in Isle of Wight. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 125 places across Isle of Wight.
Every address in PO30 is within our area. That includes homes on Main Road, Moor Lane and Upper Lane and the roads around them. Neighbouring places we cover include Brighstone (1 mile south), Thorncross (1 mile south-east), Shorwell (2 miles east), Little Atherfield (3 miles south-east) and Atherfield Green (3 miles south-east). Further out, we also cover Newport (6 miles north-east), Ryde (12 miles north-east), Cowes (9 miles north-east), Sandown (10 miles east), Shanklin (10 miles east) and Ventnor (9 miles south-east). Some remote addresses need extra planning, so it’s best to call first.
Near you in Moortown
In Moortown, that means homes near St. Mary's Church, The Three Bishops pub and Brighstone Church of England Aided Primary School. Nearby you will also find Brighstone Village Museum (less than half a mile south) and Whitecroft Hospital (4.5 miles east). The countryside around Moortown includes Brighstone Down.
Work for landlords and builders
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We work for landlords, letting agents and housing providers in Moortown as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What a repair cannot fix
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Metal that has corroded all the way through
- Wear across the entire surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Towns and villages near Moortown
What else we do in Moortown
What happens on the day
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take two to three hours for most chips, and you’re welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the next day.
Getting ready for the visit
- Clear the area around the damage
- Let us know about parking or access
- Ensure the room can be ventilated
Ask for a price
For a price in Moortown, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Get a dripping tap fixed promptly
- Use a soft cloth and washing-up liquid for everyday cleaning
- Put a towel in the bath if you are working above it
- Store metal items away from the bath
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
About our accreditations · Every repair comes with a one-year guarantee.
