Dorset · England
Bath Repair in Morcombelake
Local bath repair for Morcombelake: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- An old repair that has yellowed or come loose
- Damage beneath the taps
How it works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to two to three hours for most chips, tidy-up included.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
- Open a window if you can
Ask for a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Advice
Bath repair in Morcombelake without replacing anything
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. We work on whirlpool & spa baths, cast iron enamel and pressed steel enamel, and people most frequently call us about cracks in an acrylic bath and chips under the taps.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Location
- Morcombelake (DT6)
- Region
- Dorset
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:
- Cracks in parts of an acrylic bath we can’t get to from below
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Morcombelake
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
Nearby places to Morcombelake
Also in Morcombelake
Questions from Morcombelake
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
What does bath repair cost?
Prices start from £95. We give a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item with your DT6 postcode.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Where we work around Morcombelake
Morcombelake is about 4 miles west of Bridport, in Dorset. Jobs in Morcombelake are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Morcombelake is one of 462 places in Dorset where we work.
Jobs in DT6 are booked in the same way as anywhere else. Streets in the area include Verriott's Lane, Loves Lane and Gibbs Lane, and we cover them all. Neighbouring places we cover include Whitchurch Canonicorum (1 mile north), Ryall (1 mile north-east), North Chideock (1 mile east), Chideock (2 miles south-east) and Seatown (2 miles south-east). Further out, we also cover Bridport (4 miles east), Lyme Regis (4 miles west), Beaminster (6 miles north-east), Allington (4 miles east), Burton Bradstock (6 miles south-east) and Bradpole (5 miles east).
What’s near Morcombelake
Typical jobs here are in homes near Church of St Gabriel. Well-known places in the area include Chideock and Seatown Museum (1.2 miles east) and Bridport Community Hospital (3.5 miles east). The countryside around Morcombelake includes Hardown Hill.
Keeping it looking good
It’s all simple stuff:
- A dripping tap stains enamel, so fix it early
- Get any new chip repaired before it rusts
- Rinse it down after each bath
- Use a soft cloth and washing-up liquid for everyday cleaning
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Our prices are the same across the UK, with no extra for Morcombelake. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- A fixed quote before you book
- We will tell you if it’s not worth repairing
- We come to you, anywhere in the UK
- One price list for the entire UK
See our full price list or resurfacing vs replacement cost guide.
When to call us in Morcombelake
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
People usually call us after spotting something like this:
- Scratches you can feel with a fingernail
- A cracked acrylic bath
- Rust by the waste and overflow
- Damage done while the bathroom was being fitted
Comparing quotes
- How your room will be protected
- Whether a trained technician does the job
- How changes to the job are handled
- Whether the price is fixed and includes VAT
Landlords, agents and businesses in Morcombelake
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
