Northumberland · England

Bath chip & crack repair in Morpeth, Northumberland

Problem with your bath in Morpeth? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • Chips under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Morpeth

Different materials, different repairs

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.

Bath repair in Morpeth, done in place

A damaged bath doesn’t have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, mixing the colour on the day. We work on roll-top & freestanding, whirlpool & spa baths and pressed steel enamel, and common reasons people contact us are rust spots around the plughole and chips under the taps.

You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.

Where
Morpeth (NE61)
Region
Northumberland
Cover
12 months on all our work
Quote
From £95. Fixed and free, based on photos
Call
0345 017 0787
Page updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

How it works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a few hours. We clean up when we’re done and let you know when you can use it again.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. Next we fill the damage and sand it smooth and level.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the next day.

Before we arrive

  • Mention any parking restrictions or tricky access
  • Move bottles, mats and clutter away from the area
  • Tell us if there are stairs or a lift

Ask for a price

You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Send pictures for a quote

Read more

For landlords and businesses

If you manage property in Morpeth, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

Your questions about bath repair in Morpeth

Is it messy?

Dust sheets and masking go down before we start, and we clean up when we have finished.

Can you repair a hole in a bath?

In most cases. Send us a photo of the hole and one from under the bath if you can.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

What happens next?

We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.

Is a repair better than a new one?

Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do you cover the whole of Northumberland?

We work UK-wide, and that includes Morpeth. Our prices are the same everywhere.

About Morpeth

Morpeth is about 7 miles north-west of Blyth, in Northumberland. We travel to customers in Morpeth, so you don’t need to take anything anywhere. We work in 189 places across Northumberland. You can also see our page for Newcastle upon Tyne, about 12 miles away.

All of NE61 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Castle Square, Castle Walk and High Park and the roads around them. Being close to the A192 and A196, Morpeth is easy for our repair technicians to reach. We also cover the places around Morpeth: Bullers Green (1 mile north-west), Hepscott (2 miles south-east), Pegswood (2 miles north-east), Hepscott Park (2 miles south-east) and North Choppington (2 miles east). We also work in nearby towns such as Blyth (7 miles south-east), Cramlington (7 miles south-east), Ashington (5 miles east), Bedlington (4 miles south-east), Prudhoe (15 miles south-west) and Newsham (7 miles south-east). Morpeth is among the bigger towns we cover in Northumberland.

Local landmarks in Morpeth

Around Morpeth, we work in homes near The King Edward VI Academy, Morpeth Chantry and Sun Inn, among other places. Nearby too are The King Edward VI Academy (0.9 miles north), Morpeth First School (under half a mile north-east) and Mafeking Park (within half a mile east). Morpeth has its own railway station: Morpeth station. Further afield, we also cover the area around Municipal Borough of Morpeth (less than half a mile north-west) and Morpeth Castle (less than half a mile north-east).

Map of Morpeth © OpenStreetMap contributors

Repairing versus replacing in Morpeth

A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.

Why us?

  • We’ll tell you if it’s not worth repairing
  • Normally one visit, start to finish
  • Work done at your home or business
  • Accredited with CHAS, Constructionline and SafeContractor

Read our pricing and guide to resurfacing and replacement costs.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • Ensure an acrylic bath is firm underfoot
  • Avoid scourers, wire wool and gritty cream cleaners
  • Stick to mild cleaners and a soft cloth
  • Get a dripping tap fixed promptly

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.

Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.

When to call us in Morpeth

Rust normally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

These are the problems we’re asked about most:

  • Rust by the waste and overflow
  • A chipped rim or side
  • Chips under the taps
  • Chips caused by builders

What your quote should include

  • Whether the price covers travel
  • How long it needs to cure
  • What protection goes down before work starts
  • Whether the colour is mixed to match

How to compare quotes

What we can’t put right

We won’t take on work that won’t last, so here’s what a repair can’t put right:

  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Cracks in acrylic we cannot reach from underneath
  • Flexing caused by a failed cradle or loose feet

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths

Prices and what affects them

Prices start from £95. We charge the same across the UK, including Morpeth. What changes the price is:

  • How much damage there is
  • Any earlier repairs that need removing first
  • Whether we combine several jobs
  • The material and finish

The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

Send photos for a quote

You can generally get a fixed price without us visiting. To help us price it:

  • Good light, ideally daylight, without flash glare
  • A photo taken from further back
  • A close-up of the damage, in focus
  • Where you are, by postcode

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.