Cheshire East · England

Bath chip & crack repair in Moss Houses, Cheshire East

Problem with your bath in Moss Houses? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • Rust spots around the plughole
  • Scuffs and scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Moss Houses homes

Landlord and trade work in Moss Houses

We work for landlords, letting agents and housing providers in Moss Houses as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

About our bath repair in Moss Houses

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We regularly repair pressed steel enamel, roll-top & freestanding and acrylic, and the jobs we see most are chips caused by builders and a chipped rim or side.

The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.

Where
Moss Houses (SK11)
Region
Cheshire East
Cover
A year, on every repair
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Where we work around Moss Houses

Moss Houses is about 2 miles south-west of Macclesfield, in Cheshire East. Anywhere in SK11, a technician comes to you. Moss Houses is one of 254 towns and villages in Cheshire East we cover. Our nearest city page is Manchester, about 17 miles away.

Jobs in SK11 work the same way as everywhere else we cover. Streets in the area include Congleton Road and Lowes Lane, all of which we cover. Other places close to Moss Houses include Gawsworth (1 mile south-west), Lower Pexhill (1 mile west), Broken Cross (2 miles north), Oakgrove (2 miles south-east) and Highlane (2 miles south-west). Within a short drive, we also cover Crewe (15 miles south-west), Congleton (5 miles south-west), Wilmslow (7 miles north-west), Knutsford (10 miles north-west), Middlewich (12 miles west) and Sandbach (11 miles south-west).

Landmarks near Moss Houses

Typical jobs here are in homes near The Macclesfield Academy, Gawsworth Primary School and St James' Church and the streets around them. For rail, the closest station is Macclesfield station, about 2.2 miles north-east of the centre. Other landmarks nearby include Silk Museum (1.9 miles north-east) and Macclesfield (2.1 miles north-east). For a walk, there’s Croker Hill and Danes Moss Nature Reserve.

Map of Moss Houses © OpenStreetMap contributors

Repairing versus replacing in Moss Houses

Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in a single visit. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why choose Surface Doctor in Moss Houses

  • One visit for most repairs
  • One price list for the whole UK
  • CHAS, Constructionline and SafeContractor accredited
  • We leave the room as we found it

See our full price list and guide to resurfacing and replacement costs.

When a repair isn’t the answer

We will not take on work that will not last, so these are the limits:

  • Flexing caused by a failed cradle or loose feet
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Metal that has corroded all the way through

If in doubt, send pictures and we will say what we think before you book.

Surfaces we repair

  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths

Moss Houses questions

How long does the repair take to cure?

Generally the following day. We confirm the time before we leave.

Do you come to Moss Houses?

We do. We send a technician to Moss Houses for every job, and the price is the same as everywhere else.

How do I get a price for bath repair in Moss Houses?

Repairs from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your SK11 postcode.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

Can you repair a hole in a bath?

Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

How invisible is a bath repair?

On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Can you repair something that’s been repaired before?

Most of the time. Tell us what was done before and we will plan for it.

Signs you need bath repair in Moss Houses

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.

Signs it’s time to call us include:

  • Chips along the edge of the bath
  • Rusty patches near the plughole
  • Damage beneath the taps
  • A hole punched through by something heavy

What to look for in a quote

  • How to care for the finish
  • The length of the guarantee and what it covers
  • Who will actually do the work
  • How changes to the job are handled

Choosing a repair company

What bath repair costs

Prices start from £95. There’s no charge for travel to Moss Houses. The price depends on:

  • Any earlier repairs that need removing first
  • Where the damage is and how we get to it
  • Doing more than one item at once
  • Whether it’s a chip, crack, burn or wear

Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Quotes from your pictures

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • One picture of the entire bath
  • The postcode, so we can plan the visit
  • Something in shot to show the size
  • Any earlier repairs or coatings

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Looking after it afterwards

It’s all simple stuff:

  • Store metal items away from the bath
  • Fix dripping taps early to stop staining and limescale
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Avoid scourers, wire wool and gritty cream cleaners

Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.

How it works

From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the day after.

How to prepare

  • Let us know about parking or access
  • Let us know which floor the room is on
  • Let us know if it has been repaired before

Ask for a price

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Send pictures for a quote

Advice

Repairs by material

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.