Bradford · England
Bath Repair in Mountain
Damaged bath in Mountain? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Impact holes in acrylic
- Rusty patches near the plughole
The process
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Have somewhere for us to park nearby if possible
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Related advice
Bath repair in Mountain without replacing anything
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. Typical jobs include scratches you can feel with a fingernail and chips along the edge of the bath, across whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Mountain (BD13)
- Area hub
- Bradford
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
When to call us in Mountain
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
If you can see any of these, send us a photo:
- Deep scratches in acrylic
- Rust by the waste and overflow
- Chips along the edge of the bath
- A failed DIY repair that is discoloured or lifting
Before you book anyone
- What happens if they find more damage
- How soon you can use it again
- How your room will be protected
- Who will actually do the work
Keeping it looking good
Once the work has cured, treat it gently:
- Don’t leave razors or cans standing in the bath
- Stick to mild cleaners and a soft cloth
- Cover the bath during DIY or decorating
- Rinse it down after each bath
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
Materials and what they mean for the repair
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
When we’d advise against a repair
We will not take on work that will not last, so these are the limits:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
Send us pictures and we will tell you honestly.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Repair or replace: which is better?
Replacing a fitted bath normally involves a plumber, removing the old bath, making good the tiles and panel and getting rid of the old bath. Repairing it deals only with the damage in a single visit. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why Mountain customers choose us
- One visit for most repairs
- A fixed quote before you book
- Nothing taken out or refitted
- We leave the room as we found it
Take a look at our pricing or guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- Unusual colours or finishes
- The material and finish
- Access to the area
- The type of damage
Our prices are the same across the UK, so there is no premium for Mountain. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Our work in Mountain
Mountain is about 1 mile north-west of Queensbury, in Bradford. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Mountain is one of 140 places in Bradford we cover. We work right across the region, from Mountain to Leeds (about 13 miles away).
Postcode districts we cover here: BD13. From Micklemoss Drive, Bush Hill Fold and Grouse Moor Lane or a nearby road, we can come to you. Nearby, we also work in West Scholes (1 mile north-east), Harper Bower (1 mile west), Queensbury (1 mile south-east), Ambler Thorn (1 mile south) and Bradshaw (1 mile south-west). Within a short drive, we also cover Bradford (4 miles east), Keighley (7 miles north), Bingley (5 miles north), Shipley (5 miles north-east), Baildon (6 miles north-east) and Great Horton (3 miles east).
Local landmarks in Mountain
Typical jobs here are in homes near Queensbury Academy, Church of the Holy Trinity and Foxhill Primary School. For rail, the closest station is Halifax station, roughly 3.7 miles south of the centre. Well-known places in the area include Westwood Park Community Hospital (2 miles east) and Calderdale Industrial Museum (3.6 miles south). Not far away are Heaton Reservoir Nature Reserve.
Nearby places to Mountain
What else we do in Mountain
FAQs for Mountain
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
How much does bath repair cost in Mountain?
Repairs from £95. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and you will get one combined price.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Mountain.
Do you cover Mountain?
Yes. We work across the UK and travel to Mountain and the rest of Bradford. Send photos and we will quote, or call 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.
