Cambridgeshire · England

Bath Repair in Murrow

Bath repair in Murrow without the cost of replacing. Send us photos for a fixed quote, then book a visit.

  • Repairs from £95
  • Chips caused by builders
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Murrow?

Bath repair in Murrow without replacing anything

Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. Our repair technicians work on pressed steel enamel, acrylic and whirlpool & spa baths, and the jobs we see most are a chip where the taps sit and damage done while the bathroom was being fitted.

The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Area
Murrow (PE13)
Region
Cambridgeshire
Warranty
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

When a repair isn’t the answer

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Rust that has eaten right through a steel bath
  • Cracks in acrylic we cannot reach from underneath
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix

If in doubt, send photos and we’ll say what we think.

Materials we repair

  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths

Common problems we fix in Murrow

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.

Keep an eye out for these signs:

  • A chipped rim or side
  • A hole punched through by something heavy
  • Scratches you can feel with a fingernail
  • Chips under the taps

What your quote should include

  • Who will actually do the work
  • How long it needs to cure
  • Aftercare advice
  • How changes to the job are handled

Our hiring checklist

Different materials, different repairs

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.

Where we work around Murrow

Murrow is about 6 miles west of Wisbech, in Cambridgeshire. We visit homes and businesses in Murrow, so there’s no workshop to go to. We cover 371 places across Cambridgeshire. You can also see our page for London, about 79 miles away.

Here we cover the PE13 postcode area. Local streets include Back Road, Front Road and Silver's Lane, all of which we cover. If you’re just outside Murrow, we cover Parson Drove (1 mile north), Rogues Alley (1 mile south-west), Tholomas Drove (1 mile east), Bunker's Hill (2 miles east) and Throckenholt (2 miles north-west). Further out, we also cover Wisbech (6 miles east), March (7 miles south), Whittlesey (9 miles south-west), Chatteris (13 miles south), Yaxley (15 miles south-west) and Ramsey (15 miles south-west).

Local landmarks in Murrow

Our clients here include homes close to Murrow Primary Academy and Church of Corpus Christi. Nearby you’ll also find North Cambridgeshire Hospital (5.6 miles east).

Map of Murrow © OpenStreetMap contributors

Looking after it afterwards

Much of the damage we repair could have been avoided. A few tips:

  • Do not leave razors or cans standing in the bath
  • Cover the bath during DIY or decorating
  • Don’t scrub with anything abrasive
  • Give the bath a quick rinse after use

Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.

If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.

Why repair rather than replace?

Many people think a damaged bath means a new one. In most cases it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Why us?

  • Straight answers about what a repair can do
  • No extra charge for your area
  • Technicians who travel to you, UK-wide
  • Nothing taken out or refitted

See our prices page or bath cost comparison.

Can I fix it myself?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.

What happens on the day

Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which usually takes two to three hours for most chips. If anything looks different from your photos, we will talk to you before going ahead.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the day after.

How to prepare

  • Avoid using the area for a few hours before we arrive
  • Let us know about parking or access
  • Ensure the room can be ventilated

How to get a price

We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.

Send photos for a quote

Related advice

Landlords, agents and businesses in Murrow

If you manage property in Murrow, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

We work for landlords, letting agents and housing providers in Murrow as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

FAQs for Murrow

How long before I can use the bath?

Usually within a day, though it depends on what we’ve done.

What areas do you cover?

All of Cambridgeshire, and the rest of the UK. There is no extra charge for travel.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

Can pets and children be at home?

Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.

Is a repair better than a new one?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

Is a bath repair durable?

Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

Something went through my bath. Can it be fixed?

In most cases. Photos of the hole and the underside help us check.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.