Coventry · England
Bath Repair for New Arley homes
Damaged bath in New Arley? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Chips under the taps
Honest limits
A repair is not right for every job, including:
- Rust that has eaten right through a steel bath
- Wear across the whole surface, which needs re-enamelling
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we’ll say what we think.
What we work on
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Bath repair at your home in New Arley
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. If you are dealing with damage beneath the taps and chips on the rim or sides, we can generally put it right, whatever the material.
Every job is backed for twelve months in New Arley and everywhere else. We return to put right any problem with the work.
- Where
- New Arley (CV7)
- County
- Coventry
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Places near New Arley
Other services in New Arley
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
When to call us in New Arley
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
If you can see any of these, send us a picture:
- A chip where the taps sit
- Chips along the edge of the bath
- Scuffs and scratches in the surface
- Hairline or through cracks in acrylic
What your quote should include
- Is the price fixed, and does it include VAT?
- What happens if they find more damage
- Whether a trained technician does the job
- How the room is protected while they work
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
New Arley questions
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
When can you do it?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we’ll plan for it.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is repairing better than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Covering New Arley
New Arley is about 4 miles north-west of Bedworth, in Coventry. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Our repair technicians cover 88 places in Coventry. Our nearest city page is Birmingham, about 14 miles away.
All of CV7 is within our area, from the main roads to the quietest streets. Whether you live on Hollick Crescent, Lichfield Close and Earnlege Way or anywhere nearby, a technician can come to you. Close by, we cover Old Arley (1 mile north-west), Devitts Green (1 mile north-west), Astley (1 mile east), Ansley (1 mile north-east) and Galley Common (2 miles north-east). Further out, we also cover Coventry (7 miles south-east), Hillfields (7 miles south-east), Bishopsgate Green (7 miles south-east), Radford (7 miles south), Ernesford Grange (9 miles south-east) and Foleshill (7 miles south-east).
Landmarks near New Arley
Typical jobs here are in homes near Arley Primary School and St Michael and the streets around them. For rail, the closest station is Bermuda Park station, roughly 4.2 miles east of the centre. Further afield, we also cover the area around Hartshill Castle (3.6 miles north-east) and George Eliot Hospital (4.1 miles east). For a walk, there’s Ladywalk Reserve.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Avoid scourers, wire wool and gritty cream cleaners
- Protect the bath with a towel when doing jobs nearby
- Store metal items away from the bath
- Get a dripping tap fixed promptly
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. We charge the same wherever you are, with no extra for New Arley. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- A fixed quote before you book
See our full price list and resurfacing vs replacement cost guide.
The process
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. You can expect it to take a morning or an afternoon, and we will tell you if anything changes.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the next day.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Avoid using the area for a few hours before we arrive
- Have a window or extractor fan available
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
