Kent · England
Bath Repair in New Street
Chip and crack repairs to enamel, acrylic and cast iron baths in New Street, carried out at your home and guaranteed for a year.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
Where we work around New Street
New Street is about 6 miles south of Northfleet, in Kent. Whether you are in the middle of New Street or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We work in 922 places in Kent, from the larger towns to small villages. You can also see our page for London, about 21 miles away.
Jobs in TN15 work the same way as everywhere else we cover. If you’re just outside New Street, we cover Ridley (1 mile west), South Street (1 mile east), Hodsoll Street (1 mile south-west), Culverstone Green (1 mile south-east) and Priestwood Green (1 mile east). Further out, we also cover Maidstone (10 miles south-east), Dartford (8 miles north-west), Sevenoaks (8 miles south-west), Royal Tunbridge Wells (15 miles south), Gravesend (6 miles north) and Tonbridge (11 miles south).
Landmarks near New Street
Typical jobs here are in homes near Trosley Country Park, Culverstone Green Primary School and Church of Saint Peter, among other places. New Street’s nearest station is Meopham station, about 2.4 miles north. Well-known places in the area include Ightham Court (4.6 miles south-west) and Coldrum Long Barrow (2.7 miles south-east).
Bath repair in New Street without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. If you are dealing with chips along the edge of the bath and chips caused by builders, we can help.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- New Street (TN15)
- Region
- Kent
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
We begin by going over the job with you. After that, protection goes down around the work area and the work begins. It normally takes two to three hours for most chips, and we’ll tell you if anything changes.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the day after.
Preparing for the visit
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Advice
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Do not leave a fresh chip for long
- Do not scrub with anything abrasive
- Rinse it down after each bath
- Clean with warm water and a mild detergent
There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
We work for landlords, letting agents and housing providers in New Street as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair will not do:
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
- Wear across the whole surface, which needs re-enamelling
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Common questions in New Street
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
How invisible is a bath repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can I get a quote without a visit?
Normally, yes. Clear photos let us give you a fixed price without visiting.
Do you need bath repair in New Street?
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
People typically call us after spotting one of these:
- A hole punched through by something heavy
- A failed DIY repair that’s discoloured or lifting
- Rust by the waste and overflow
- A cracked acrylic bath
What to look for in a quote
- How soon you can use it again
- How the room is protected while they work
- Aftercare advice
- A fixed price, and whether VAT is included
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Nearby places to New Street
More services for New Street
Repairing versus replacing in New Street
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. The price reflects the work involved, not your postcode. The full price is agreed before booking.
Why New Street customers choose us
- One visit for most repairs
- No extra charge for your area
- Fixed prices from your pictures
- Colour mixed on the day to match
Take a look at our prices page and bath cost comparison.
How we price bath repair
Repairs from £95. You will know the full cost before booking. We take into account:
- How easy the damage is to reach
- How many items we do on one visit
- What the surface is made of
- Previous DIY repairs that have to come out
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
We price nearly every job from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- One picture of the entire bath
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
