Norfolk · England
Bath Repair in Newton Flotman
Bath repair in Newton Flotman without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- Rust by the waste and overflow
- A kit repair that didn’t last
Bath repair at your home in Newton Flotman
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour-matched so it blends in. If you’re dealing with snagging damage from a refit and a cracked acrylic bath, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Newton Flotman (NR15)
- Region
- Norfolk
- Warranty
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Newton Flotman
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We carry out planned and one-off repairs for housing associations and facilities teams in Norfolk and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How we price bath repair
Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:
- What the surface is made of
- How many areas need work
- How hard the colour is to match
- Where the damage is and how we get to it
Our prices are the same across the UK, with no extra for Newton Flotman. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
To get a price, send two or three photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a morning or an afternoon. We clean up when we are done and let you know when you can use it again.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Open a window if you can
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
Get a quote
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. There is no charge for the quote and no obligation.
Read more
Also near Newton Flotman
Other services in Newton Flotman
What we’re called out for in Newton Flotman
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Get in touch if you’ve noticed:
- Holes from dropped items
- Hairline or through cracks in acrylic
- Chips caused by builders
- Rust by the waste and overflow
What your quote should include
- How long the guarantee is and what it covers
- How changes to the job are handled
- Whether they match the colour on site
- When it can be used again
Looking after it afterwards
How the surface is treated afterwards matters:
- Have new chips seen to early
- Keep metal cans and razors off the surface
- Do not scrub with anything abrasive
- Clean with warm water and a mild detergent
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
About Newton Flotman
Newton Flotman is about 6 miles south-east of Wymondham, in Norfolk. From the centre of Newton Flotman to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Newton Flotman is one of 797 towns and villages in Norfolk we cover.
We cover every part of the NR15 postcode area. From Church Road, Exchange Road and St Mary's Close or a nearby road, we can come to you. Other places close to Newton Flotman include Saxlingham Thorpe (1 mile south), Foxhole (1 mile south-east), Lower Tasburgh (1 mile south-west), Saxlingham Nethergate (1 mile south-east) and Flordon (1 mile south-west). Within a short drive, we also cover Norwich (7 miles north), Wymondham (6 miles north-west), Sprowston (9 miles north), Thorpe St Andrew (8 miles north-east), Attleborough (11 miles west) and Norwich Lanes (6 miles north).
Local landmarks in Newton Flotman
Around Newton Flotman, we work in homes near Smockmill Common, Maids Head Public House and Church of St Mary the Virgin. Well-known places in the area include Norfolk and Norwich University Hospital (5.6 miles north) and Forncett Industrial Steam Museum (3.6 miles south-west). For a walk, there’s Hethel Old Thorn.
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we can’t get to from below
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we work on in Newton Flotman
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
FAQs for Newton Flotman
Do you work in Newton Flotman?
Yes, we do. Technicians travel to Newton Flotman from across the region, and the price is the same as everywhere else.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
What happens once I’ve sent pictures?
We come back with a fixed quote, normally with dates to choose from. You’re under no obligation.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
About our accreditations · Every repair comes with a one-year guarantee.
