Sandwell · England
Bath chip & crack repair in Newton, Sandwell
Chip and crack repairs to enamel, acrylic and cast iron baths in Newton, carried out at your home and guaranteed for a year.
- Repairs from £95
- A cracked acrylic bath
- Rusty patches near the plughole
Repairing versus replacing in Newton
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why book with us
- One visit for most repairs
- Every repair guaranteed for a year
- We’ll tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
Read our full price list and guide to resurfacing and replacement costs.
About our bath repair in Newton
Most of our bath repairs take a few hours, and the bath is back in use the day after. You will not need a plumber or tiler, because the bath doesn’t move. We regularly repair whirlpool & spa baths, acrylic and cast iron enamel, and common reasons people get in touch are deep scratches in acrylic and a hole punched through by something heavy.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Newton (B43, B20, B42)
- Area hub
- Sandwell
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Newton
Other services in Newton
Questions from Newton
What about rust by the waste?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
It’s been repaired before. Can you still fix it?
Most of the time. Tell us what was done before.
When can I have a bath again?
Typically the next day. We’ll tell you the exact curing time when we finish.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Newton and nearby
Newton is about 2 miles east of West Bromwich, in Sandwell. Whether you are in the middle of Newton or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover 33 places in Sandwell, from the larger towns to small villages.
Here we cover the B43, B20 and B42 postcode area. We regularly work on streets such as West Road, Green Lane and James Road and the roads around them. Newton is on the A4041, so it’s easy for us to reach. Nearby, we also work in Great Barr (1 mile north-east), Hamstead (1 mile south-east), Tower Hill (1 mile east), Browns Green (1 mile south-east) and Charlemont (1 mile west). Further out, we also cover Tipton (5 miles west), Oldbury (4 miles south-west), Smethwick (3 miles south), Rowley Regis (5 miles south-west), Darlaston (4 miles north-west) and Wednesbury (3 miles north-west).
Local landmarks in Newton
Around Newton, we work in homes near Red House Park, Hamstead Hall Academy and St Bernard's Church Hamstead, among other places. You’ll also find Hamstead Hall Academy (0.5 miles south-east), Hamstead Infant School (less than half a mile south-east) and Beaufort Arms (0.8 miles south-east). The closest station to Newton is Hamstead station, roughly 0.9 miles south-east of the centre. Well-known places in the area include Avery Historical Museum (2.8 miles south) and Walsall Castle (3.9 miles north-west). The countryside around Newton includes Barr Beacon and Sandwell Valley RSPB reserve.
How to look after the repair
Once the work has cured, treat it gently:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Get a dripping tap fixed promptly
- Rinse the bath after use, especially in hard water areas
- Protect the bath with a towel when doing jobs nearby
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
What bath repair costs
Prices start from £95. There are no hourly rates or hidden extras. The price depends on:
- Unusual colours or finishes
- How many areas need work
- How easy the damage is to reach
- Any earlier repairs that need removing first
The price reflects the work involved, not your postcode. The full price is agreed before you book.
How to get a fixed price
Most quotes are done from photos alone. To make it quick:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A wider photo showing the whole bath
Upload a photo of the damage and one of the whole item, and tell us you are in Newton, and we will come back with a fixed quote.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Landlords, agents and businesses in Newton
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
The process
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours. If we find something your photos didn’t show, we will explain it before carrying on.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Let us know which floor the room is on
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Advice
What we cannot put right
To be straight with you, some problems need a different fix:
- Metal that has corroded all the way through
- Cracks in acrylic we can’t reach from underneath
- Wear across the entire surface, which needs re-enamelling
If in doubt, send pictures and we will say what we think.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
Do you need bath repair in Newton?
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
People typically call us when they notice one of these:
- Chips under the taps
- Rust by the waste and overflow
- Hairline or through cracks in acrylic
- An old repair that has yellowed or come loose
What to look for in a quote
- Who turns up on the day
- What happens if they find more damage
- Whether they match the colour on site
- The length of the guarantee and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
