Isle of Wight · England
Bath Repair for Ningwood homes
Bath repair in Ningwood without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Repairs from £95
- Chips caused by builders
- A chip where the taps sit
Bath repair in Ningwood, done in place
A typical bath repair is a few hours’ work, and you can usually bathe again the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. We regularly repair acrylic, cast iron enamel and roll-top & freestanding, and the jobs we see most are a kit repair that didn’t last and chips caused by builders.
Every job is backed for twelve months in Ningwood and everywhere else. We return to put right any problem with the work.
- Area
- Ningwood (PO41)
- County
- Isle of Wight
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why choose Surface Doctor in Ningwood
- Accredited with CHAS, Constructionline and SafeContractor
- Most jobs done in one visit
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
Take a look at our prices page and bath cost comparison.
Honest limits
We will always be straight with you, so here’s what a repair can’t fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we cannot get to from below
- Water coming from the waste or taps rather than the bath
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Covering Ningwood
Ningwood is about 6 miles west of Newport, in Isle of Wight. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Ningwood is one of 125 places in Isle of Wight we cover. Our jobs stretch from Ningwood to London (80 miles away).
Our visits in PO41 are booked in the same way as anywhere else. We also travel to Newbridge (1 mile south-east), Wellow (1 mile west), Thorley Street (1 mile west), Shalcombe (2 miles south) and Calbourne (2 miles south-east). Larger places within reach include Newport (6 miles east), Ryde (12 miles east), Cowes (7 miles north-east), Sandown (12 miles east), Shanklin (12 miles east) and Ventnor (12 miles south-east). Remote and island addresses take a little more planning, so call us to arrange it.
Local landmarks in Ningwood
Typical jobs here are in homes near New Inn, Shalfleet Church of England Primary School and Church of St. Michael the Archangel, among other places. Nearby you’ll also find St Mary's Hospital (5.9 miles east) and Yarmouth Castle (3.1 miles west). Not far away are Lymington and Keyhaven Marshes Nature Reserve and Westover Down.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Ningwood as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
How it works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which generally takes two to three hours for most chips. If anything looks different from your pictures, we’ll talk to you before going ahead.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the next day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Related advice
Signs you need bath repair in Ningwood
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Keep an eye out for any of the following:
- A kit repair that didn’t last
- A cracked acrylic bath
- Scratches you can feel with a fingernail
- Damage beneath the taps
Comparing quotes
- What preparation is included
- How your room will be protected
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
FAQs for Ningwood
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
When can I have a bath again?
Normally by the following day, depending on the repair.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Is a holed acrylic bath repairable?
Generally. Send us a picture of the hole and one from under the bath if you can.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Also in Ningwood
How to look after the repair
Simple care helps the repair last. We recommend:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Give the bath a quick rinse after use
- Get any new chip repaired before it rusts
- Keep metal cans and razors off the surface
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
