Staffordshire · England
Bath chip & crack repair in No Man's Heath, Staffordshire
Local bath repair for No Man's Heath: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Holes from dropped items
- Damage done while the bathroom was being fitted
About No Man's Heath
No Man's Heath is about 6 miles north-east of Tamworth, in Staffordshire. Whether you’re in the middle of No Man's Heath or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. No Man's Heath is one of 512 places in Staffordshire where we work. We work right across the region, from No Man's Heath to Birmingham (20 miles away).
We work across B79 and the streets around it. That includes homes on Ash Lane and Austrey Lane. Other places close to No Man's Heath include Newton Regis (1 mile south-west), Appleby Parva (1 mile east), Austrey (1 mile south), Chilcote (2 miles north) and Appleby Magna (2 miles east). Within a short drive, we also cover Burton upon Trent (9 miles north), Tamworth (6 miles south-west), Lichfield (11 miles west), Burntwood (15 miles west), Horninglow (11 miles north) and Stowe (10 miles west).
Around No Man's Heath
Locally, our jobs take us to homes close to Newton Regis CofE Primary School and Saint Mary the Virgin and the streets around them. For rail, the closest station is Polesworth station, roughly 3.9 miles south-west. Further afield, we also cover the area around The Midland Motor Museum (2.2 miles north-east).
Bath repair in No Man's Heath without replacing anything
A typical bath repair is a few hours’ work, and the bath is back in use the following day. There is no need to book a plumber or tiler, because nothing is disconnected. Common call-outs are for a kit repair that didn’t last and a cracked acrylic bath, in cast iron enamel, whirlpool & spa baths and pressed steel enamel.
Your repair is guaranteed for a year, as with every job we do.
- Where
- No Man's Heath (B79)
- Region
- Staffordshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in No Man's Heath
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
- Check that an acrylic bath doesn’t move when you stand in it
- Cover the bath during DIY or decorating
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Towns and villages near No Man's Heath
Also in No Man's Heath
What we’re called out for in No Man's Heath
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
If you can see any of these, send us a picture:
- Damage beneath the taps
- Snagging damage from a refit
- Rust by the waste and overflow
- Hairline or through cracks in acrylic
What your quote should include
- What aftercare is recommended
- What the guarantee covers, and for how long
- What happens if they find more damage
- Who turns up on the day
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Why No Man's Heath customers choose us
- A fixed quote before booking
- Most jobs done in one visit
- Colours mixed by hand to suit your surface
- No need to remove anything
Take a look at our pricing or resurfacing vs replacement cost guide.
How it works
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a few hours, depending on the damage. The room is left tidy.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Read more
Prices and what affects them
Prices start from £95. Every quote is fixed and free. What we look at:
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- How many items we do on one visit
Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Where you are, by postcode
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair can’t fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we will give you a straight answer.
Materials we work on in No Man's Heath
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
FAQs for No Man's Heath
When can I have a bath again?
Most baths can be used the day after. We confirm the time before we leave.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
What do you need from me?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you come to No Man's Heath?
Yes. We work across the UK and come to No Man's Heath. Send us pictures for a fixed quote, or call 0345 017 0787.
What happens after I send pictures?
We review the pictures and send a fixed quote and the next dates we have.
Repairs by material
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
