Shropshire · England
Bath chip & crack repair in Norbury, Shropshire
Bath repair in and around Norbury: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- A chip where the taps sit

Aftercare tips
To keep it looking its best for years:
- Avoid scourers, wire wool and gritty cream cleaners
- Fix dripping taps early to stop staining and limescale
- Rinse the bath after use, especially in hard water areas
- Store metal items away from the bath
Keep metal objects like razors and cans off the surface, because they can mark the enamel. A dripping tap should be fixed early, too.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Bath repair in Norbury, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can typically use the bath the following day. Whether it’s rusty patches near the plughole and damage beneath the taps, we can normally put it right, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Norbury (SY13)
- Region
- Shropshire
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026

About Norbury
Norbury is about 6 miles south-west of Nantwich, in Shropshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 433 places across Shropshire, from the larger towns to small villages. Our nearest city page is Liverpool, about 29 miles away.
We work across the SY13 postcode area and the streets around it. Whether you live on School Lane and Norbury Town Lane or anywhere nearby, a technician can come to you. If you’re just outside Norbury, we cover Gauntons Bank (1 mile north-east), Holtridge (1 mile north), Swanwick Green (1 mile north-west), Norbury Common (1 mile north-west) and Marbury (1 mile south). Larger places within reach include Market Drayton (11 miles south-east), Whitchurch (4 miles south), Wem (12 miles south), Ellesmere (13 miles south-west), Loggerheads (13 miles south-east) and Prees Higher Heath (7 miles south).
Landmarks near Norbury
Locally, our jobs take us to homes close to St Michael's Church and Swan Inn, among other places. Norbury’s nearest station is Wrenbury station, about 2.5 miles east. Well-known places in the area include Marbury cum Quoisley (1.1 miles south) and Castle Hill motte (4.6 miles west).
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Towns and villages near Norbury
Other services in Norbury
FAQs for Norbury
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which usually takes a morning or an afternoon. If we find something your photos didn’t show, we will explain it before carrying on.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Point us to the nearest place to park
- Open a window if you can
- Mention if the room is upstairs or in a flat
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Related advice
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Norbury as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- We will tell you if it’s not worth repairing
- Work done at your home or business
- A fixed quote before you book
- A year’s guarantee on all work
Take a look at our full price list or guide to resurfacing and replacement costs.
Honest limits
A repair isn’t right for every job, including:
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in acrylic we can’t reach from underneath
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
How we price bath repair
Repairs from £95. Every quote is fixed and free. What we look at:
- The material
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- How many items we do on one visit
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
Good photos mean an accurate price. Here’s what helps:
- The material, if you know it
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
- Where you are, by postcode
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.

